Content Comparison

...

• Create Resource Pool
• Edit Resource Pool
• Get Resource Pool
• Get Resource Pool Properties
• List Resource Pools
• Remove Resource Pool

Create Resource Pool

This activity creates a new Resource Pool on the existing Resource Pool or the specified Cluster.

Activity Parameters

The Create Resource Pool activity parameters can be provided by manual inserted values or via IN arguments or variables:

Image Added

Parameters:

• Name (text box editor type): the name of the new Resource Pool.
• Parent ID (text box editor type): the ID of the Parent Location chosen where you wish to create the new Resource Pool (Enter the ID or bind this parameter with the output parameter from Get VM Resource Pool or Get VM Cluster).
• Parent Type (combo box control): the Parent Location Type for the new resource pool, whether it is an existing Resource Pool or a Cluster.

Resources (parameters):

• CPU Limit (text box editor type): limit the utilization of the resource pool,and it will not exceed it even if there are available resources. This is typically used to ensure a consistent performance of resource pools independent of available resources. If set to -1, then there is no fixed limit on resource usage (only bounded by available resources and shares). Units are MHz. E.g. 40 and this number should be higher than CPU reservation parameter.
• CPU Reservation (text box editor type): amount of resource that is guaranteed available to the resource pool. Reserved resources are not wasted if they are not used. If the utilization is less than the reservation, the resources can be utilized by other running virtual machines. Units are MHz. E.g. 20 and this number should be lower than CPU Limit parameter.
• CPU Shares (text box editor type): the number of shares allocated. Used to determine resource allocation in case of resource contention. This value is only set if level is set to custom. If level is not set to custom, this value is ignored. Therefore, only shares with custom values can be compared.
• CPU Shares Level (combo box control): set the allocation level, it is a simplified view of shares. Levels map to a pre-determined set of numeric values for shares. If the shares value does not map to a predefined size, then the level is set as custom.If custom -> Shares value is specified in the 'shares' parameter, if high -> Shares = 2000 * number of virtual CPUs, if low -> Shares = 500 * number of virtual CPUs, or if normal -> Shares = 1000 * number of virtual CPUs
• Expandable CPU Reservation (combo box control): in a resource pool with an expandable reservation, the reservation on a resource pool can grow beyond the specified value, if the parent resource pool has unreserved resources. A non-expandable reservation is called a fixed reservation.
• Expandable Memory Reservation (combo box control): in a resource pool with an expandable reservation, the reservation on a resource pool can grow beyond the specified value, if the parent resource pool has unreserved resources. A non-expandable reservation is called a fixed reservation.
• Memory Limit (text box editor type): limit the utilization of the resource pool,and it will not exceed it even if there are available resources. This is typically used to ensure a consistent performance of resource pools independent of available resources. If set to -1, then there is no fixed limit on resource usage (only bounded by available resources and shares). Units are MB. E.g. 40 and this number should be higher than Memory reservation parameter.
• Memory Reservation (text box editor type): amount of resource that is guaranteed available to the resource pool. Reserved resources are not wasted if they are not used. If the utilization is less than the reservation, the resources can be utilized by other running virtual machines. Units are MB. E.g. 20 and this number should be lower than Memory Limit parameter.
• Memory Shares (text box editor type): the number of shares allocated. Used to determine resource allocation in case of resource contention. This value is only set if level is set to custom. If level is not set to custom, this value is ignored. Therefore, only shares with custom values can be compared.
• Memory Shares Level (combo box control): this is the allocation level, it is a simplified view of shares. Levels map to a pre-determined set of numeric values for shares. If the shares value does not map to a predefined size, then the level is set as custom.

The Read Only Output variable are the possible output values that the activity will provide:

• Output: outputs the new created Resource Pool ID.
• Output Status: outputs True if the operation succeeded otherwise False.

Edit Resource Pool

Edits the specified Resource Pool

Activity Parameters

The Connect to FTP activity parameters can be provided by manual inserted values or via IN arguments or variables:

Image Added

Parameters:

• Host (text box editor type): the FTP host.
• Password combo box control): the password for the provided username.
• Password Binding (text box editor type): bind to a variable containing the encrypted password. (This parameter is used only when the user wants to send an encripted password from outside the task, for example Flowster User Portal).
• Username (text box editor type): the username for authentication; if left empty, windows session credentials are used.

The Read Only Output variable are the possible output values that the activity will provide:

• Connection: outputs a FTP connection. The output of this activity should be used as Input for all Connection parameters used for all activities placed under FTP category.

Get Resource Pool

Returns the specified Resource Pool ID

Activity Parameters

The Connect to FTP activity parameters can be provided by manual inserted values or via IN arguments or variables:

Image Added

Parameters:

• Host (text box editor type): the FTP host.
• Password combo box control): the password for the provided username.
• Password Binding (text box editor type): bind to a variable containing the encrypted password. (This parameter is used only when the user wants to send an encripted password from outside the task, for example Flowster User Portal).
• Username (text box editor type): the username for authentication; if left empty, windows session credentials are used.

The Read Only Output variable are the possible output values that the activity will provide:

• Connection: outputs a FTP connection. The output of this activity should be used as Input for all Connection parameters used for all activities placed under FTP category.

Get Resource Pool Properties

Retrieves all the runtime information for a resource pool

Activity Parameters

The Connect to FTP activity parameters can be provided by manual inserted values or via IN arguments or variables:

Image Added

Parameters:

• Host (text box editor type): the FTP host.
• Password combo box control): the password for the provided username.
• Password Binding (text box editor type): bind to a variable containing the encrypted password. (This parameter is used only when the user wants to send an encripted password from outside the task, for example Flowster User Portal).
• Username (text box editor type): the username for authentication; if left empty, windows session credentials are used.

The Read Only Output variable are the possible output values that the activity will provide:

• Connection: outputs a FTP connection. The output of this activity should be used as Input for all Connection parameters used for all activities placed under FTP category.

List Resource Pools

Retrieves a list of all the resource pools

Activity Parameters

The Connect to FTP activity parameters can be provided by manual inserted values or via IN arguments or variables:

Image Added

Parameters:

• Host (text box editor type): the FTP host.
• Password combo box control): the password for the provided username.
• Password Binding (text box editor type): bind to a variable containing the encrypted password. (This parameter is used only when the user wants to send an encripted password from outside the task, for example Flowster User Portal).
• Username (text box editor type): the username for authentication; if left empty, windows session credentials are used.

The Read Only Output variable are the possible output values that the activity will provide:

• Connection: outputs a FTP connection. The output of this activity should be used as Input for all Connection parameters used for all activities placed under FTP category.

Remove Resource Pool

Removes the specified Resource Pool.

Activity Parameters

The Connect to FTP activity parameters can be provided by manual inserted values or via IN arguments or variables:

Image Added

Parameters:

• Host (text box editor type): the FTP host.
• Password combo box control): the password for the provided username.
• Password Binding (text box editor type): bind to a variable containing the encrypted password. (This parameter is used only when the user wants to send an encripted password from outside the task, for example Flowster User Portal).
• Username (text box editor type): the username for authentication; if left empty, windows session credentials are used.

The Read Only Output variable are the possible output values that the activity will provide:

• Connection: outputs a FTP connection. The output of this activity should be used as Input for all Connection parameters used for all activities placed under FTP category.