Versions Compared

Version Old Version 25 New Version 26
Changes made by

wiki

wiki

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  • Busy Trigger (text box editor type) (type: integer): enter the busy trigger.
  • Caller Name (combo box control type) (type: booleanstring): set the caller name.
  • Caller Number (combo box control) (type: string)
  • Dialed Number
  • Directory number UUID
  • Display
  • Display Ascii
  • EI64Mask
  • Index
  • Label
  • Max Number of Calls
  • Partition Name
  • Partition Name UUID
  • Pattern
  • Redirected Number

Parameters:

  • Always Use Prime Line : set the caller number.
  • Dialed Number (combo box control) (type: string): set the line dialed number.
  • Directory number UUID (text box editor type) (type: string): specify the always use prime line optionAlways Use Prime Line For Voice Message enter the directory number UUID.
  • Display (text box editor type) (type: string): specify the always use prime line for voice message optionClass ID enter the line display.
  • Display Ascii (text box editor type) (type: string): enter the new phone's class ID stringCommon Phone Config Name display ascii.
  • EI64Mask (text box editor type) (type: string): enter the common phone configuration nameConnection 64 Mask.
  • Index (text box editor type)   (type: string): the Cisco Call Manager connection string. The output from "Connect To Cisco Call Manager" activity should be used as Input for this parameter.Default Profile Name enter the line index.
  • Label (text box editor type) (type: string): enter the default profile nameDescription line label.
  • Max Number of Calls (text box editor type) (type: string) : enter the new phone's descriptionDevice Mobility Mode max number of calls.
  • Partition Name (text box editor type) (type: string): enter the device mobility modeDevice Pool Name partition name.
  • Partition Name UUID (text box editor type) (type: string): enter the device pool partition name UUID.
  • Location Name Pattern (text box editor type) (type: string): enter the location name
     Name (text box editor line pattern.
  • Redirected Number (combo box control type) (type: string): enter the new phone's name. Only URL-friendly characters are allowedOther set the line redirected number.


Parameters:

  • Always Use Prime Line (text box editor type) (type: string/integer): specify other fields if needed. Only string and number values can be usedPhone Template Name the always use prime line option
  • Always Use Prime Line For Voice Message (text box editor type) (type: string): enter the phone template name
  • Presence Group Name (text box editor type) (type: string): specify the presence group name
  • Product specify the always use prime line for voice message option
  • Class ID (text box editor type) (type: string): enter the product new phone's class ID stringProtocol
  • Common Phone Config Name (text box editor type) (type: string): enter the new phone's protocolProtocol Side common phone configuration name
  • Common Device Config UUID (text box editor type) (type: string):  enter the new phone's protocol sideSecurity Profile Name enter the common device config UUID
  • Common Phone Config Name (text box editor type) (type: string): specify the security profile enter the common phone configuration nameUse Trusted Relay Point
  • Connection (text box editor type) (type: string): specify the trusted relay point option

The Read Only Output variable are the possible output values that the activity will provide:

  • Output result (type: boolean): outputs the status of the operation: 'True' if succeeded, otherwise 'False'.

Connect To Cisco Call Manager

Connects and returns a Cisco Call Manager connection.

Activity Parameters

...

  • the Cisco Call Manager connection string. The output from "Connect To Cisco Call Manager" activity should be used as Input for this parameter.
  • Default Profile Name (text box editor type) (type: string): enter the default profile name
  • Description (text box editor type) (type: string): enter the new phone's description
  • Device Mobility Mode (text box editor type) (type: string): enter the device mobility mode
  • Device Pool Name (text box editor type) (type: string): enter the device pool name
  • Device Pool UUID  (text box editor type) (type: string): enter the device pool UUID
  • Location Name (text box editor type) (type: string): enter the location name
  • Location UUID (text box editor type) (type: string): enter the location UUID
  • Name (text box editor type) (type: string): enter the new phone's name. Only URL-friendly characters are allowed
  • Other (text box editor type) (type: string/integer): specify other fields if needed. Only string and number values can be used
  • Phone Template Name (text box editor type) (type: string): enter the phone template name
  • Presence Group Name (text box editor type) (type: string): specify the presence group name
  • Product ID (text box editor type) (type: string): enter the product ID string
  • Protocol (text box editor type) (type: string): enter the new phone's protocol
  • Protocol Side (text box editor type) (type: string): enter the new phone's protocol side
  • Security Profile Name (text box editor type) (type: string): specify the security profile name
  • Subscribe Calling Search Space Name (text box editor type) (type: string): enter the Subscribe Calling Search Space Name
  • Subscribe Calling Search Space UUID (text box editor type) (type: string): enter the Subscribe Calling Search Space UUID
  • Use Trusted Relay Point (text box editor type) (type: string): specify the trusted relay point option

The Read Only Output variable are the possible output values that the activity will provide:

  • Output result (type: boolean): outputs the status of the operation: 'True' if succeeded, otherwise 'False'.

Connect To Cisco Call Manager

Connects and returns a Cisco Call Manager connection.

Activity Parameters

The Connect To Cisco Call Manager activity parameters can be provided by manual inserted values or via IN arguments or variables:

Image Added

Authentication:

  • Use SSL (combo box control) (type: boolean): specify whether to use SSL or not

Parameters:

  • API Host (text box editor type) (type: string): enter the Call Manager API host
  • API Port (text box editor type) (type: string): enter the Call Manager API port
  • API Version (text box editor type) (type: string): enter the Call Manager API version
  • Password (text box editor type) (type: string): enter the user password
  • Password Binding (text box editor type) (type: string): bind to a variable containing the encrypted password for connection. (This parameter is used only when the user wants to send an encrypted password from outside the task, for example Flowster Studio Portal)
  • Username (text box editor type) (type: string): enter the username with access to the Cisco Call Manager API

The Read Only Output variable are the possible output values that the activity will provide:

  • Connection (type: string): outputs the Cisco Call Manager connection. The output from this activity should be used as an input for the Connection parameters, existing in all the activities placed under the 'Cisco Call Manager' category

Disconnect From Call Manager

Disconnects the specified Cisco Call Manager connection.

Activity Parameters

The Disconnect From Call Manager activity parameters can be provided by manual inserted values or via IN arguments or variables:

Image Added

Parameters:

  • Connection (text box editor type) (type: string): the Cisco Call Manager connection string. The output from "Connect To Cisco Call Manager" activity should be used as Input for this parameter.

Edit Call Pickup Group

Updates the specified call pickup group.

Activity Parameters

The Edit Call Pickup Group activity parameters can be provided by manual inserted values or via IN arguments or variables:

Image Removed

Authentication:

...

Image Added

Parameters:

  • Connection (text box editor type) (type: string): the Cisco Call Manager connection string. The output from "Connect To Cisco Call Manager" activity should be used as Input for this parameter.
  • Description (text box editor type) (type: booleanstring): specify whether to use SSL or not

Parameters:

  • API Host enter the call pickup group description
  • Name (text box editor type) (type: string): enter the Call Manager API hostAPI Port call pickup group's name
  • Other (text box editor type) (type: string): enter the Call Manager API portAPI Version /integer): specify other fields if needed. Only string and number values can be used
  • Pattern (text box editor type) (type: string): enter the Call Manager API versionPassword call pickup group pattern
  • Pickup Notification (text box editor type) (type: string): enter  enter the user passwordPassword Binding pickup notification
  • Pickup Notification Timer (text box editor type)   (type: string): bind to a variable containing the encrypted password for connection. (This parameter is used only when the user wants to send an encrypted password from outside the task, for example Flowster Studio Portal)Username  enter the pickup notification timer. Default value is '6'
  • Route Partition Name (text box editor type) (type: string): enter the username with access to the Cisco Call Manager API enter the route partition name

The Read Only Output variable are the possible output values that the activity will provide:

  • Connection Output result (type: stringboolean): outputs the Cisco Call Manager connection. The output from this activity should be used as an input for the Connection parameters, existing in all the activities placed under the 'Cisco Call Manager' category

Disconnect From Call Manager

...

  • status of the operation: 'True' if succeeded, otherwise 'False'.

Edit Device Profile

Updates the specified device profile.

Activity Parameters

The Disconnect From Call Manager Edit Device Profile activity parameters can be provided by manual inserted values or via IN arguments or variables:

Image Added

Image RemovedImage Added


ParametersLine:

  • Connection Busy Trigger (text box editor type) (type) : integer): enter the busy trigger.
  • Caller Name (combo box control type) (type: string): the Cisco Call Manager connection string. The output from "Connect To Cisco Call Manager" activity should be used as Input for this parameter.

Edit Call Pickup Group

Updates the specified call pickup group.

Activity Parameters

The Edit Call Pickup Group activity parameters can be provided by manual inserted values or via IN arguments or variables:

Image Removed

Parameters:

  • Connection set the caller name.
  • Caller Number (combo box control) (type: string): set the caller number.
  • Dialed Number (combo box control) (type: string): set the line dialed number.
  • Directory number UUID (text box editor type)   (type: string): the Cisco Call Manager connection string. The output from "Connect To Cisco Call Manager" activity should be used as Input for this parameter.Description enter the directory number UUID.
  • Display (text box editor type) (type: string): enter the call pickup group descriptionName line display.
  • Display Ascii (text box editor type) (type: string): enter the call pickup group's nameOther display ascii.
  • EI64Mask (text box editor type) (type: string/integer): specify other fields if needed. Only string and number values can be usedPattern enter the 64 Mask.
  • Index (text box editor type) (type: string): enter the line index.
  • Label (text box editor type) (type: string): enter the call pickup group patternPickup Notification line label.
  • Max Number of Calls (text box editor type) (type: string) :  enter the pickup notificationPickup Notification Timer enter the max number of calls.
  • Partition Name (text box editor type) (type: string):  enter the pickup notification timer. Default value is '6'Route Partition Name enter the partition name.
  • Partition Name UUID (text box editor type) (type: string):  enter enter the route partition name

The Read Only Output variable are the possible output values that the activity will provide:

  • Output result UUID.
  • Pattern (text box editor type) (type: booleanstring): outputs the status of the operation: 'True' if succeeded, otherwise 'False'.

Edit Device Profile

Updates the specified device profile.

Activity Parameters

The Edit Device Profile activity parameters can be provided by manual inserted values or via IN arguments or variables:

Image Removed

...

  • enter the line pattern.
  • Redirected Number (combo box control type) (type: string): set the line redirected number.


Parameters:

  • Class (text box editor type) (type: string): enter the device profile's class
  • Connection (text box editor type) (type: string): the Cisco Call Manager connection string. The output from "Connect To Cisco Call Manager" activity should be used as Input for this parameter.Description used as Input for this parameter.
  • Description (text box editor type) (type: string): enter the device profile's description
  • Login User Id (text box editor type) (type: string): enter the login User Id
  • Login User UUID (text box editor type) (type: string): enter the device profile's descriptionlogin User UUID
  • Name (text box editor type) (type: string): enter the device profile's name
  • Other (text box editor type) (type: string/integer): specify other fields if needed. Only string and number values can be used.
  • Product (text box editor type) (type: string): enter the device profile's product
  • Protocol (text box editor type) (type: string): enter the protocol
  • Protocol Side (text box editor type) (type: string): enter the protocol side. Default value is 'User'.

The Read Only Output variable are the possible output values that the activity will provide:

...