Activities Activities

• Add Call Pickup Group
• Add Device Profile
• Add Hunt List
• Add Hunt Pilot
• Add Line
• Add Line Group
• Add Phone
• Connect To Cisco Call Manager
• Disconnect From Call Manager
• Edit Call Pickup Group
• Edit Device Profile
• Edit Hunt List
• Edit Hunt Pilot
• Edit Line
• Edit Line Group
• Edit Phone
• Get Call Pickup Group
• Get Device Profile
• Get Hunt List
• Get Hunt Pilot
• Get Line
• Get Line Group
• Get Phone
• Remove Call Pickup Group
• Remove Device Profile
• Remove Hunt List
• Remove Hunt Pilot
• Remove Line
• Remove Line Group

...

The Add Call Pickup Group activity parameters can be provided by manual inserted values or via IN arguments or variables:

Image RemovedImage Added

Parameters:

• Called Party Info (text box editor type) (type: string): set the called party info to true or false.
• Calling Party Phone (text box editor type) (type: string): set the calling party info to true or false.
• Connection (text box editor type) (type: string): the Cisco Call Manager connection string. The output from "Connect To Cisco Call Manager" activity should be used as Input for this parameter.
• Description (text box editor type) (type: string): enter the new call pickup group's description.
• Name (text box editor type) (type: string): enter the new call pickup group's name.
• Other (text box editor type) (type: string/integer): specify other fields if needed. Only string and number values can be used.
• Pattern (text box editor type) (type: string): enter the call pickup group pattern.
• Pickup Notification (text box editor type) (type: string): enter the pickup notification.
• Pickup Notification Timer (text box editor type) (type: string): enter the pickup notification timer. Default value is '6'.
• Route Partition Name (text box editor type) (type: string): enter the route partition name.

...

The Add Device Profile activity parameters can be provided by manual inserted values or via IN arguments or variables:

Image Added

Image RemovedImage Added

ParametersLine:

• Class Busy Trigger (text box editor type) (type: stringinteger): enter the device profile's classbusy trigger.
• Connection Caller Name (text combo box editor typecontrol )   (type: string): the Cisco Call Manager connection string. The output from "Connect To Cisco Call Manager" activity should be used as Input for this parameter.Description (text box editor typeset the caller name.
• Caller Number (combo box control) (type: string): enter the device profile's descriptionset the caller number.Name
• Dialed Number (text combo box editor typecontrol) (type: string): enter the device profile's nameOther set the line dialed number.
• Directory number UUID (text box editor type) (type: string/integer): specify other fields if needed. Only string and number values can be used.Product enter the directory number UUID.
• Display (text box editor type) (type: string): enter the device profile's productProtocol line display.
• Display Ascii (text box editor type) (type: string): enter the protocoldisplay ascii.
• Protocol Side E164Mask (text box editor type) (type: string): enter the protocol side. Default value is 'User'.

The Read Only Output variable are the possible output values that the activity will provide:

• Output result (type: boolean): outputs the status of the operation.

Add Hunt List

Adds the specified hunt list.

Activity Parameters

The Add Hunt List activity parameters can be provided by manual inserted values or via IN arguments or variables:

Image Removed

Parameters:

• Call Manager Group Name (64 Mask.
• Index (text box editor type) (type: string): enter the call manager group nameline index.
• Connection Label (text box editor type)   (type: string): the Cisco Call Manager connection string. The output from "Connect To Cisco Call Manager" activity should be used as Input for this parameter.Hunt List Description enter the line label.
• Max Number of Calls (text box editor type) (type: string) : enter the new hunt list's descriptionmax number of calls.
• Hunt List Partition Name (text box editor type) (type: string): enter the new hunt list's partition name.
• Other Partition Name UUID (text box editor type) (type: string/integer): specify other fields if needed. Only string and number values can be used.Route List Enabled (combo box control): enter the partition name UUID.
• Pattern (text box editor type) (type: booleanstring): specify whether the route list to be enabled.Voice Mail Usage enter the line pattern.
• Phone Template Name (text box editor type) (Type: string): enter phone template name.
• Redirected Number (combo box control ) (type: booleanstring): specify whether to use voice mail or not.

The Read Only Output variable are the possible output values that the activity will provide:

• Output result (type: boolean): outputs the status of the operation: 'True' if succeeded, otherwise 'False'.

Add Hunt Pilot

Adds the specified hunt pilot.

Activity Parameters

The Add Hunt Pilot activity parameters can be provided by manual inserted values or via IN arguments or variables:

Image Removed

Image Removed

Calling Party Transformations:

• Calling Line Presentation set the line redirected number.

Parameters:

• Class (text box editor type) (type: string): enter the device profile's class.
• Connection (text box editor type) (type: string): the Cisco Call Manager connection string. The output from "Connect To Cisco Call Manager" activity should be used as Input for this parameter.
• Description (text box editor type) (type: string): specify the calling line presentationCalling Name Presentation enter the device profile's description.
• Login User Id (text box editor type) (type: string):  specify the calling name presentationCalling Party Number Type enter the login User Id.
• Login User UUID (text box editor type) (type: string):  specify the calling party number type. Default is 'Cisco CallManager'Calling Party Numbering Plan enter the login User UUID.
• Name (text box editor type) (type: string): specify the calling party numbering plan. Default is 'Cisco CallManager'

Connected Party Transformations:

• Connected Line Presentation enter the device profile's name
• Other (text box editor type) (type: string/integer): specify the connected line presentationConnected Name Presentation other fields if needed. Only string and number values can be used.
• Product (text box editor type) (type: string): specify the connected name presentation

Parameters:

• Alerting Name enter the device profile's product
• Protocol (text box editor type) (type: string): enter the alerting nameprotocol.Block Enabled
• Protocol Side (combo text box controleditor type) (type: booleanstring): specify whether the block to be enabled or not.Connection enter the protocol side. Default value is 'User'.
• TelecasterServiceName (text box editor type)   (type: string): the Cisco Call Manager connection string. The output from "Connect To Cisco Call Manager" activity should be used as Input for this parameter.
• Description (text box editor type) (type: string): enter the description for the hunt pilot.
• Hunt List Name (text box editor type) (type: string): enter the hunt list name.
• Hunt Pilot enter the TelecasterServiceName e.g. 'logout'.

The Read Only Output variable are the possible output values that the activity will provide:

• Output result (type: boolean): outputs the status of the operation. 'True' if succeeded, otherwise 'False'.

Add Hunt List

Adds the specified hunt list.

Activity Parameters

The Add Hunt List activity parameters can be provided by manual inserted values or via IN arguments or variables:

Image Added

Parameters:

• Call Manager Group Name (text box editor type) (type: string): enter the new hunt pilot's call manager group name.
• Other Connection (text box editor type) (type: string/integer): specify other fields if needed. Only string and number values can be used.Pattern the Cisco Call Manager connection string. The output from "Connect To Cisco Call Manager" activity should be used as Input for this parameter.
• Hunt List Description (text box editor type) (type: string): enter the hunt pilot pattern.Pattern Precedence new hunt list's description.
• Hunt List Name (text box editor type) (type: string): enter the hunt pilot pattern precedencenew hunt list's name.Route Partition Name
• Other (text box editor type) (type: string): enter the route partition name.

Queue Calls:

• Max Callers in Queue (text box editor type/integer): specify other fields if needed. Only string and number values can be used.
• Route List Enabled (combo box control) (type: integerboolean): enter the maximum number of callers allowed in queue. Default value is '32'.Max Wait Time in Queue (text box editor typespecify whether the route list to be enabled.
• Voice Mail Usage (combo box control) (type: integer): enter the maximum wait time in queue. Default value is '900'boolean): specify whether to use voice mail or not.

The Read Only Output variable are the possible output values that the activity will provide:

• Output result (type: boolean): outputs the status of the operation: 'True' if succeeded, otherwise 'False'.

Add

...

Hunt Pilot

Adds the specified linehunt pilot.

Activity Parameters

The Add Line Hunt Pilot activity parameters can be provided by manual inserted values or via IN arguments or variables:

Image Added

Image RemovedImage Added

ParametersCalling Party Transformations:

• Active Calling Line Presentation (combo text box controleditor type) (type: booleanstring): specify whether the line should be active or not. Default value is 'true'.Connection calling line presentation
• Calling Name Presentation (text box editor type)   (type: string): the Cisco Call Manager connection string. The output from "Connect To Cisco Call Manager" activity should be used as Input for this parameter.Description  specify the calling name presentation
• Calling Party Number Type (text box editor type) (type: string): specify the calling party number type. Default is 'Cisco CallManager'
• Calling Party Numbering Plan (text box editor type) (type: string): enter the description.Line Pattern specify the calling party numbering plan. Default is 'Cisco CallManager'

Connected Party Transformations:

• Connected Line Presentation (text box editor type) (type: string): enter specify the new line's pattern.Other connected line presentation
• Connected Name Presentation (text box editor type) (type: string/integer): specify other fields if needed. Only string and number values can be used

The Read Only Output variable are the possible output values that the activity will provide:

• Output Result (type: boolean): outputs the status of the operation: 'True' if succeeded, otherwise 'False'.

Add Line Group

Adds the specified line group.

Activity Parameters

The Add Line Group activity parameters can be provided by manual inserted values or via IN arguments or variables:

Image Removed

Parameters:

• Auto Log Off Hunt (combo box control) (type: boolean): specify whether to log off hunt automatically. Default value is 'false'.
• Connection (text box the connected name presentation

Parameters:

• Alerting Name (text box editor type) (type: string): enter the alerting name.
• Block Enabled (combo box control) (type: boolean): specify whether the block to be enabled or not.
• Connection (text box editor type) (type: string): the Cisco Call Manager connection string. The output from "Connect To Cisco Call Manager" activity should be used as Input for this parameter.
• Distribution Algorithm Description (text box editor type) (type: string): enter the distribution algorithm. Default value is 'Longest Idle Time'the description for the hunt pilot.
• Hunt Algorithm BusyList Name (text box editor type) (type: string): enter the hunt algorithm when busy. Default value is 'Try next member; then, try next group in Hunt List'Hunt Algorithm No Answer (list name.
• Hunt Pilot Name (text box editor type) (type: string): enter the hunt algorithm when no answer. Default value is 'Try next member; then, try next group in Hunt List'Hunt Algorithm Not Available new hunt pilot's name.
• Other (text box editor type) (type: string): enter the hunt algorithm when not available. Default value is 'Try next member; then, try next group in Hunt List'Line Group Name /integer): specify other fields if needed. Only string and number values can be used.
• Pattern (text box editor type) (type: string): enter the new line group's nameOther hunt pilot pattern.
• Pattern Precedence (text box editor type) (type: string/integer): specify other fields if needed. Only string and number values can be usedRnaReversionTimeOut enter the hunt pilot pattern precedence.
• Route Partition Name (text box editor type) (type: string): enter the rnaReversionTimeOut. Default is 10.

The Read Only Output variable are the possible output values that the activity will provide:

• Output result (type: boolean): outputs the status of the operation: 'True' if succeededroute partition name.

Queue Calls:

• Max Callers in Queue (text box editor type) (type: integer): enter the maximum number of callers allowed in queue. Default value is '32'.
• Max Wait Time in Queue (text box editor type) (type: integer): enter the maximum wait time in queue. Default value is '900'.

The Read Only Output variable are the possible output values that the activity will provide:

• Output result (type: boolean): outputs the status of the operation: 'True' if succeeded, otherwise 'False'.

Add

...

Line

Adds the specified phoneline.

Activity Parameters

The Add Phone Line activity parameters can be provided by manual inserted values or via IN arguments or variables:

Image Removed

Image RemovedImage Added

Parameters:

• Always Use Prime Line (text box editor typeActive (combo box control) (type: stringboolean): specify whether the always use prime line optionAlways Use Prime Line For Voice Message line should be active or not. Default value is 'true'.
• Alert Name (text box editor type) (type: string): specify the always use prime line for voice message optionClass ID enter the alert name.
• Call Pickup Group Name (text box editor type)(type: string): enter the new phone's class ID stringCommon Phone Config Name Call Pickup Group Name.
• Call Pickup Group UUID (text box editor type) (type: string): enter the common phone configuration nameCall Pickup Group UUID.
• Connection (text box editor type) (type: string): the Cisco Call Manager connection string. The output from "Connect To Cisco Call Manager" activity should be used as Input for this parameter.
• Default Profile Name Description (text box editor type) (type: string): enter the default profile nameDescription description.
• Destination (text box editor type) (type: string): enter the new phone's descriptionDevice Mobility Mode destination.
• External Call Control Profile (text box editor type) (type: string): enter the device mobility modeDevice Pool Name (text box editor typeexternal call control profile e.g. 'ECCP2'
• Forward to voice Email(combo box control) (type: string): enter the device pool nameLocation Name enable the Forward To Voice Email.
• Line Pattern (text box editor type) (type: string): enter the location name
  Name (text box editor type) (type: string): enter the new phone's name. Only URL-friendly characters are allowednew line's pattern.
• Other (text box editor type) (type: string/integer): specify other fields if needed. Only string and number values can be usedPhone Template Name .
• Route Partition Name (text box editor type) (type: string): enter the phone template route partition namePresence Group Name .
• Search Space Name (text box editor type) (type: string): specify the presence group nameProduct ID enter the Search Space Name.
• Search Space Name UUID (text box editor type) (type: string): enter the product ID stringProtocol Search Space Name UUID.
• Share Line Appearance Css Name (text box editor type) (type: string): enter the new phone's protocol
• Protocol Side (text box editor type) (type: string): enter the new phone's protocol side
• Security Profile Name (text box editor type) (type: string): specify the security profile name
• Use Trusted Relay Point Share Line Appearance Css Name.
• Share Line Appearance Css UUID (text box editor type) (type: string): specify the trusted relay point optionenter the Share Line Appearance Css UUID.

The Read Only Output variable are the possible output values that the activity will provide:

• Output result Result (type: boolean): outputs the status of the operation: 'True' if succeeded, otherwise 'False'.

Connect To Cisco Call Manager

...

Add Line Group

Adds the specified line group.

Activity Parameters

The Connect To Cisco Call Manager The Add Line Group activity parameters can be provided by manual inserted values or via IN arguments or variables:

Image RemovedImage Added

AuthenticationParameters:

• Use SSL Auto Log Off Hunt (combo box control) (type: boolean): specify whether to use SSL or not

Parameters:

• API Host log off hunt automatically. Default value is 'false'.
• Connection (text box editor type) (type: string): enter the Call Manager API hostAPI Port the Cisco Call Manager connection string. The output from "Connect To Cisco Call Manager" activity should be used as Input for this parameter.
• Distribution Algorithm (text box editor type) (type: string): enter the Call Manager API portAPI Version distribution algorithm. Default value is 'Longest Idle Time'.
• Hunt Algorithm Busy (text box editor type) (type: string): enter the Call Manager API versionPassword hunt algorithm when busy. Default value is 'Try next member; then, try next group in Hunt List'
• Hunt Algorithm No Answer (text box editor type) (type: string): enter the user passwordPassword Binding hunt algorithm when no answer. Default value is 'Try next member; then, try next group in Hunt List'
• Hunt Algorithm Not Available (text box editor type)   (type: string): bind to a variable containing the encrypted password for connection. (This parameter is used only when the user wants to send an encrypted password from outside the task, for example Flowster Studio Portal)Username  enter the hunt algorithm when not available. Default value is 'Try next member; then, try next group in Hunt List'
• Line Group Name (text box editor type) (type: string): enter the username with access to the Cisco Call Manager API

The Read Only Output variable are the possible output values that the activity will provide:

• Connection new line group's name
• Other (text box editor type) (type: string/integer): outputs the Cisco Call Manager connection. The output from this activity should be used as an input for the Connection parameters, existing in all the activities placed under the 'Cisco Call Manager' category

Disconnect From Call Manager

Disconnects the specified Cisco Call Manager connection.

Activity Parameters

The Disconnect From Call Manager activity parameters can be provided by manual inserted values or via IN arguments or variables:

Image Removed

Parameters:

• Connection specify other fields if needed. Only string and number values can be used
• RnaReversionTimeOut (text box editor type)   (type: string): the Cisco Call Manager connection string. The output from "Connect To Cisco Call Manager" activity should be used as Input for this parameter.

Edit Call Pickup Group

Updates the specified call pickup group.

Activity Parameters

...

• enter the rnaReversionTimeOut. Default is 10.

The Read Only Output variable are the possible output values that the activity will provide:

• Output result (type: boolean): outputs the status of the operation: 'True' if succeeded, otherwise 'False'.

Add Phone

Adds the specified phone.

Activity Parameters

The Add Phone activity parameters can be provided by manual inserted values or via IN arguments or variables:

Image Removed

Parameters:

...

Image Added    

Image Added

Image Added

Line:

• Busy Trigger (text box editor type)   (type: stringinteger): the Cisco Call Manager connection string. The output from "Connect To Cisco Call Manager" activity should be used as Input for this parameter.Description (text box editor enter the busy trigger.
• Caller Name (combo box control type) (type: string): enter the call pickup group descriptionName (text box editor typeset the caller name.
• Caller Number (combo box control) (type: string): enter the call pickup group's nameOther (text box editor typeset the caller number.
• Dialed Number (combo box control) (type: string/integer): specify other fields if needed. Only string and number values can be usedPattern set the line dialed number.
• Directory number UUID (text box editor type) (type: string): enter the call pickup group patternPickup Notification directory number UUID.
• Display (text box editor type) (type: string):  enter the pickup notificationPickup Notification Timer enter the line display.
• Display Ascii (text box editor type) (type: string):  enter the pickup notification timer. Default value is '6'Route Partition Name enter the display ascii.
• E164Mask (text box editor type) (type: string):  enter the route partition name

The Read Only Output variable are the possible output values that the activity will provide:

• Output result (type: boolean): outputs the status of the operation: 'True' if succeeded, otherwise 'False'.

Edit Device Profile

Updates the specified device profile.

Activity Parameters

The Edit Device Profile activity parameters can be provided by manual inserted values or via IN arguments or variables:

Image Removed

Parameters:

• Connection (text box editor type) enter the 64 Mask.
• Index (text box editor type) (type: string): enter the line index.
• Label (text box editor type) (type: string): enter the line label.
• Max Number of Calls (text box editor type) (type: string) : the Cisco Call Manager connection string. The output from "Connect To Cisco Call Manager" activity should be used as Input for this parameter.Description enter the max number of calls.
• Partition Name (text box editor type) (type: string): enter the device profile's descriptionName partition name.
• Partition Name UUID (text box editor type) (type: string): enter the device profile's nameOther the partition name UUID.
• Pattern (text box editor type) (type: string/integer): specify other fields if needed. Only string and number values can be used

The Read Only Output variable are the possible output values that the activity will provide:

• Output result (type: boolean): outputs the status of the operation: 'True' if succeeded, otherwise 'False'.

Edit Hunt List

Updates the specified hunt list.

Activity Parameters

The Edit Hunt List activity parameters can be provided by manual inserted values or via IN arguments or variables:

Image Removed

Parameters:

• Call Manager Group Name enter the line pattern.
• Redirected Number (combo box control ) (type: string): set the line redirected number.

Parameters:

• Always Use Prime Line (text box editor type) (type: string): specify the always use prime line option
• Always Use Prime Line For Voice Message (text box editor type) (type: string): specify the always use prime line for voice message option
• Calling Search Space Name (text box editor type) (type: string): enter the call manager group calling space name.
• Connection Class ID (text box editor type)   (type: string): the Cisco Call Manager connection string. The output from "Connect To Cisco Call Manager" activity should be used as Input for this parameter.Hunt List Description enter the new phone's class ID string
• Common Phone Config Name (text box editor type) (type: string): enter the new hunt list's descriptionHunt List Name common phone configuration name
• Common Device Config UUID (text box editor type) (type: string): enter the hunt list's nameOther common device config UUID
• Common Phone Config Name (text box editor type) (type: string/integer): specify other fields if needed. Only string and number values can be used
• Route List Enabled (combo box control) (type: boolean): specify whether the route list to be enabled or not
• Voice Mail Usage (combo box control) (type: boolean): specify whether to use voice mail or not

The Read Only Output variable are the possible output values that the activity will provide:

• Output result (type: boolean): outputs the status of the operation: 'True' if succeeded, otherwise 'False'.

Edit Hunt Pilot

Updates the specified hunt pilot.

Activity Parameters

The Edit Hunt Pilot activity parameters can be provided by manual inserted values or via IN arguments or variables:

Image Removed

Image Removed

Calling Party Transformations:

• Calling Line Presentation ): enter the common phone configuration name
• Connection (text box editor type) (type: string): the Cisco Call Manager connection string. The output from "Connect To Cisco Call Manager" activity should be used as Input for this parameter.
• Default Profile Name (text box editor type) (type: string): enter the default profile name
• Description (text box editor type) (type: string): enter the new phone's description
• Device Mobility Mode (text box editor type) (type: string): specify the calling line presentationCalling Name Presentation enter the device mobility mode
• Device Pool Name (text box editor type) (type: string):  specify enter the calling device pool name presentationCalling Party Number Type
• Device Pool UUID  (text box editor type) (type: string):  specify the calling party number type. Default is 'Cisco CallManager'Calling Party Numbering Plan enter the device pool UUID
• Location Name (text box editor type) (type: string): specify the calling party numbering plan. Default is 'Cisco CallManager'

Connected Party Transformations:

• Connected Line Presentation enter the location name
  
• Location UUID (text box editor type) (type: string): specify the connected line presentationConnected Name Presentation enter the location UUID
• Name (text box editor type) (type: string): specify the connected name presentation

Parameters:

• Alerting Name enter the new phone's name. Only URL-friendly characters are allowed
• Other (text box editor type) (type: string/integer): enter the alerting name.Block Enabled (combo box controlspecify other fields if needed. Only string and number values can be used
• Owner Username (text box editor type) (type: booleanstring): specify whether the block to be enabled or not.Connection enter the owner username.
• Owner Username UUID (text box editor type)   (type: string): the Cisco Call Manager connection string. The output from "Connect To Cisco Call Manager" activity should be used as Input for this parameter.Description enter the owner username UUID.
• Phone Template Name (text box editor type) (type: string): enter the description for the hunt pilot.Hunt List phone template name
• Presence Group Name (text box editor type) (type: string): enter specify the hunt list presence group name.Hunt Pilot Name
• Product ID (text box editor type) (type: string): enter the new hunt pilot's name.Other product ID string
• Protocol (text box editor type) (type: string/integer): specify other fields if needed. Only string and number values can be used.Pattern ): enter the new phone's protocol
• Protocol Side (text box editor type) (type: string): enter the hunt pilot pattern.Pattern Precedence  enter the new phone's protocol side
• Security Profile Name (text box editor type) (type: string): enter the hunt pilot pattern precedence.Route Partition Name specify the security profile name
• Soft Key Template Name (text box editor type) (type: string): enter the route partition soft key template name.

Queue Calls:

• Max Callers in Queue Subscribe Calling Search Space Name (text box editor type) (type: string): enter the Subscribe Calling Search Space Name
• Subscribe Calling Search Space UUID (text box editor type) (type: integerstring): enter the maximum number of callers allowed in queue. Default value is '32'.Max Wait Time in Queue Subscribe Calling Search Space UUID
• Telecaster Service Name (text box editor type) (type: integerstring): enter the maximum wait time in queue. Default value is '900'.telecaster service name e.g. 'logout'.
• Use Trusted Relay Point (text box editor type) (type: string): specify the trusted relay point option

The Read Only Output variable are the possible output values that the activity will provide:

• Output result (type: boolean): outputs the status of the operation: 'True' if succeeded, otherwise 'False'.

Edit Line

...

Connect To Cisco Call Manager

Connects and returns a Cisco Call Manager connection.

Activity Parameters

The Edit Line Connect To Cisco Call Manager activity parameters can be provided by manual inserted values or via IN arguments or variables:

Image RemovedImage Added

ParametersAuthentication:

• Active Use SSL (combo box control) (type: boolean): Specify specify whether the line to be active use SSL or not. Default value is 'true'Connection

Parameters:

• API Host (text box editor type)   (type: string): enter the Cisco Call Manager connection string. The output from "Connect To Cisco Call Manager" activity should be used as Input for this parameter.Description Call Manager API host
• API Port (text box editor type) (type: string): enter the description.Line Pattern Call Manager API port
• API Version (text box editor type) (type: string): enter the new line pattern.Line Uuid Call Manager API version
• Password (text box editor type) (type: string): enter the uuid for the line to be edited.Other user password
• Password Binding (text box editor type) (type: string/integer): specify other fields if needed. Only string and number values can be usedRoute Partition Name ): bind to a variable containing the encrypted password for connection. (This parameter is used only when the user wants to send an encrypted password from outside the task, for example Flowster Studio Portal)
• Username (text box editor type) (type: string): enter the new route partition name.the username with access to the Cisco Call Manager API

The Read Only Output variable are the possible output values that the activity will provide:

• Output result Connection (type: booleanstring): outputs the status of the operation: 'True' if succeeded, otherwise 'False'.

Edit Line Group

...

• the Cisco Call Manager connection. The output from this activity should be used as an input for the Connection parameters, existing in all the activities placed under the 'Cisco Call Manager' category

Disconnect From Call Manager

Disconnects the specified Cisco Call Manager connection.

Activity Parameters

The Edit Line Group Disconnect From Call Manager activity parameters can be provided by manual inserted values or via IN arguments or variables:

Image RemovedImage Added

Parameters:

• Auto Log Off Hunt (combo box control) (type: boolean): specify whether to log off hunt automatically.
• Connection (text box editor type) (type: string): the Cisco Call Manager connection string. The output from "Connect To Cisco Call Manager" activity should be used as Input for this parameter.
• Distribution Algorithm (text box editor type) (type: string): enter the distribution algorithm.
• Hunt Algorithm Busy (text box editor type)

Edit Call Pickup Group

Updates the specified call pickup group.

Activity Parameters

The Edit Call Pickup Group activity parameters can be provided by manual inserted values or via IN arguments or variables:

Image Added

Parameters:

• Connection (text box editor type) (type: string): enter the hunt algorithm when busy.Hunt Algorithm No Answer the Cisco Call Manager connection string. The output from "Connect To Cisco Call Manager" activity should be used as Input for this parameter.
• Description (text box editor type) (type: string): enter the hunt algorithm when no answer. Default value is 'Try next member; then, try next group in Hunt List'Hunt Algorithm Not Available call pickup group description
• Name (text box editor type) (type: string):  enter the hunt algorithm when not available. Default value is 'Try next member; then, try next group in Hunt List'Line Group Name (text box editor type) (type: string): enter the line group'enter the call pickup group's name
• Other (text box editor type) (type: string/integer): specify other fields if needed. Only string and number values can be used
• RnaReversionTimeOut Pattern (text box editor type) (type: string): enter the rnaReversionTimeOut.

The Read Only Output variable are the possible output values that the activity will provide:

• Output result (type: boolean): outputs the call pickup group pattern
• Pickup Notification (text box editor type) (type: string): enter the pickup notification
• Pickup Notification Timer (text box editor type) (type: string): enter the pickup notification timer. Default value is '6'
• Route Partition Name (text box editor type) (type: string): enter the route partition name

The Read Only Output variable are the possible output values that the activity will provide:

• Output result (type: boolean): outputs the status of the operation: 'True' if succeeded, otherwise 'False'.

Edit

...

Device Profile

Updates the specified phone's informationdevice profile.

Activity Parameters

The Edit Phone Device Profile activity parameters can be provided by manual inserted values or via IN arguments or variables:

Image RemovedImage Added

Image RemovedImage Added

ParametersLine:

• Always Use Prime Line Busy Trigger (text box editor type) (type: stringinteger): specify the always use prime line optionAlways Use Prime Line For Voice Message (text box editor typeenter the busy trigger.
• Caller Name (combo box control ) (type: string): set the caller name.
• Caller Number (combo box control) (type: string): set the caller number.
• Dialed Number (combo box control) (type: string): specify set the always use prime line for voice message optionClass ID line dialed number.
• Directory number UUID (text box editor type) (type: string): enter the new phone's class ID stringCommon Phone Config Name directory number UUID.
• Display (text box editor type) (type: string): enter the common phone configuration nameConnection line display.
• Display Ascii (text box editor type)   (type: string): the Cisco Call Manager connection string. The output from "Connect To Cisco Call Manager" activity should be used as Input for this parameter.Default Profile Name enter the display ascii.
• E164Mask (text box editor type) (type: string): enter the default profile nameDescription 64 Mask.
• Index (text box editor type) (type: string): enter the phone's descriptionDevice Mobility Mode line index.
• Label (text box editor type) (type: string): enter the device mobility modeDevice Pool Name line label.
• Max Number of Calls (text box editor type) (type: string) : enter the device pool nameLocation Name max number of calls.
• Partition Name (text box editor type) (type: string): enter the location partition name.
• Partition Name UUID (text box editor type) (type: string): enter the phone's partition name UUID.
• Other Pattern (text box editor type) (type: string/integer): specify other fields if needed. Only string and number values can be usedPhone Template Name enter the line pattern.
• Phone Template Name (text box editor type) (type: string): enter the phone template namePresence Group Name .
• Redirected Number (combo box control ) (type: string): set the line redirected number.

Parameters:

• Class (text box editor type) (type: string): specify the presence group nameProduct ID enter the device profile's class
• Connection (text box editor type) (type: string): enter the product ID stringProtocol the Cisco Call Manager connection string. The output from "Connect To Cisco Call Manager" activity should be used as Input for this parameter.
• Description (text box editor type) (type: string): enter the new phonedevice profile's protocolProtocol Side description
• Login User Id (text box editor type) (type: string):  enter the new phone's protocol sideSecurity Profile enter the login User Id
• Login User UUID (text box editor type) (type: string): enter the login User UUID
• Name (text box editor type) (type: string): specify the security profile enter the device profile's nameUse Trusted Relay Point
• Other (text box editor type) (type: string/integer): specify the trusted relay point option

The Read Only Output variable are the possible output values that the activity will provide:

• Output result (type: boolean): outputs the status of the operation: 'True' if succeeded, otherwise 'False'.

Get Call Pickup Group

Gets the specified Pickup Group.

Activity Parameters

The Get Call Pickup Group activity parameters can be provided by manual inserted values or via IN arguments or variables:

Image Removed

Parameters:

• Call Pickup Group Name other fields if needed. Only string and number values can be used.
• Product (text box editor type) (type: string): enter the device profile's product
• Protocol (text box editor type) (type: string): enter the name for the call pickup group to be retrievedConnection protocol
• Protocol Side (text box editor type) (type: string): the Cisco Call Manager connection string. The output from "Connect To Cisco Call Manager" activity should be used as Input for this parameterenter the protocol side. Default value is 'User'.
• Telecaster Service Name (text box editor type) (type: string): enter the telecaster service name e.g. 'logout'.

The Read Only Output variable are the possible output values that the activity will provide:

• Output Call Pickup Group result (type: Collection<KeyValuePair<String,String>>boolean): outputs a collection of KeyValuePairs containing the Hunt List properties. To use the elements of the collection, use the 'Get KeyValuePair' activity with the keys: 'uuid', 'name', 'description', 'pattern', 'routePartitionName', 'pickupNotification', 'pickupNotification Timer' and 'callInfoForPickupNotification'

Get Device Profile

...

• the status of the operation: 'True' if succeeded, otherwise 'False'.

Edit Hunt List

Updates the specified hunt list.

Activity Parameters

The Get Device Profile Edit Hunt List activity parameters can be provided by manual inserted values or via IN arguments or variables:

Image RemovedImage Added

Parameters:

• Call Manager Group Name (text box editor type) (type: string): enter the call manager group name
• Connection (text box editor type) (type: string): the Cisco Call Manager connection string. The output from "Connect To Cisco Call Manager" activity should be used as Input for this parameter.Device Profile
• Hunt List Description (text box editor type) (type: string): enter the new hunt list's description
• Hunt List Name (text box editor type) (type: string): enter the name for the device profile to be retrieved.hunt list's name
• Other (text box editor type) (type: string/integer): specify other fields if needed. Only string and number values can be used
• Route List Enabled (combo box control) (type: boolean): specify whether the route list to be enabled or not
• Voice Mail Usage (combo box control) (type: boolean): specify whether to use voice mail or not

The Read Only Output variable are the possible output values that the activity will provide:

• Output Device Profile result (type: Collection<KeyValuePair<String,String>>boolean): outputs a collection the status of KeyValuePairs containing the Device Profile properties. To use the elements of the collection, use the 'Get KeyValuePair' activity with the keys: 'uuid', 'name', 'description', 'product', 'model', 'class', 'protocol', 'type', 'protocolSide', 'disableSpeaker', 'pcPort' and 'phoneTemplateName'.

Get Hunt List

...

• the operation: 'True' if succeeded, otherwise 'False'.

Edit Hunt Pilot

Updates the specified hunt pilot.

Activity Parameters

The Get Edit Hunt List Pilot activity parameters can be provided by manual inserted values or via IN arguments or variables:

Image Added

Image RemovedImage Added

ParametersCalling Party Transformations:

• Connection Calling Line Presentation (text box editor type)   (type: string): the Cisco Call Manager connection string. The output from "Connect To Cisco Call Manager" activity should be used as Input for this parameter.Hunt List Name specify the calling line presentation
• Calling Name Presentation (text box editor type) (type: string): enter  specify the name for the hunt list to be retrieved.

The Read Only Output variable are the possible output values that the activity will provide:

• Output Hunt List (type: Collection<KeyValuePair<String,String>>): outputs a collection of KeyValuePairs containing the Hunt List properties. To use the elements of the collection, use the 'Get KeyValuePair' activity with the keys: 'uuid', 'name', 'description', 'callManagerGroupName', 'routeListEnabled' and 'voiceMailUsage

Get Hunt Pilot

Gets the specified hunt pilot's information.

Activity Parameters

The Get Hunt Pilot activity parameters can be provided by manual inserted values or via IN arguments or variables:

Image Removed

Parameters:

• Connection calling name presentation
• Calling Party Number Type (text box editor type) (type: string): specify the calling party number type. Default is 'Cisco CallManager'
• Calling Party Numbering Plan (text box editor type)   (type: string): the Cisco Call Manager connection string. The output from "Connect To Cisco Call Manager" activity should be used as Input for this parameter.Hunt Pilot specify the calling party numbering plan. Default is 'Cisco CallManager'

Connected Party Transformations:

• Connected Line Presentation (text box editor type) (type: string): specify the connected line presentation
• Connected Name Presentation (text box editor type) (type: string): specify the connected name presentation

Parameters:

• Alerting Name (text box editor type) (type: string): enter the name for the hunt pilot to be retrieved.

The Read Only Output variable are the possible output values that the activity will provide:

• Output Hunt Pilot (type: Collection<KeyValuePair<String,String>>): outputs a collection of KeyValuePairs containing the Hunt List the alerting name.
• Block Enabled (combo box control) (type: boolean): specify whether the block to be enabled or not.
• Connection (text box editor type) (type: string): the Cisco Call Manager connection string. The output from "Connect To Cisco Call Manager" activity should be used as Input for this parameter.
• Description (text box editor type) (type: string): enter the description for the hunt pilot.
• Hunt List Name (text box editor type) (type: string): enter the hunt list name.
• Hunt Pilot Name (text box editor type) (type: string): enter the new hunt pilot's name.
• Other (text box editor type) (type: string/integer): specify other fields if needed. Only string and number values can be used.
• Pattern (text box editor type) (type: string): enter the hunt pilot pattern.
• Pattern Precedence (text box editor type) (type: string): enter the hunt pilot pattern precedence.
• Route Partition Name (text box editor type) (type: string): enter the route partition name.

Queue Calls:

• Max Callers in Queue (text box editor type) (type: integer): enter the maximum number of callers allowed in queue. Default value is '32'.
• Max Wait Time in Queue (text box editor type) (type: integer): enter the maximum wait time in queue. Default value is '900'.

The Read Only Output variable are the possible output values that the activity will provide:

• Output result (type: boolean): outputs the status of the operation: 'True' if succeeded, otherwise 'False'.

Edit Line

Updates the specified line.

Activity Parameters

The Edit Line activity parameters can be provided by manual inserted values or via IN arguments or variables:

Image Added

Parameters:

• Active (combo box control) (type: boolean): Specify whether the line to be active or not. Default value is 'true'
• Alert Name (text box editor type) (type: string): enter the alert name
• Call Pickup Group Name (text box editor type) (type: string): enter the Call Pickup Group Name
• Call Pickup Group UUID (text box editor type) (type: string): 
• Connection (text box editor type) (type: string): the Cisco Call Manager connection string. The output from "Connect To Cisco Call Manager" activity should be used as Input for this parameter.
• Description (text box editor type) (type: string): enter the description.
• Destination (text box editor type) (type: string): enter the destination
• Duration (text box editor type) (type: string): enter the duration for no answer forward.
• External Call Control Profile (text box editor type) (type: string): enter the external call control profile.
• Forward to voice Email (combo box control) (type: string): enable the Forward To Voice Email
• Line Pattern (text box editor type) (type: string): enter the new line pattern.
• Line Uuid (text box editor type) (type: string): enter the uuid for the line to be edited.
• Other (text box editor type) (type: string/integer): specify other fields if needed. Only string and number values can be used
• Route Partition Name (text box editor type) (type: string): enter the new route partition name.
• Search Space Name (text box editor type) (type: string): enter the Search Space Name.
• Search Space  UUID (text box editor type) (type: string): enter the Search Space UUID.
• Share Line Appearance Css Name (text box editor type) (type: string): enter the Share Line Appearance Css Name.
• Share Line Appearance Css UUID (text box editor type) (type: string): enter the Share Line Appearance Css UUID.
• Voice Mail Profile Name (text box editor type) (type: string): enter the voice mail profile name.

The Read Only Output variable are the possible output values that the activity will provide:

• Output result (type: boolean): outputs the status of the operation: 'True' if succeeded, otherwise 'False'.

Edit Line Group

Updates the specified line group.

Activity Parameters

The Edit Line Group activity parameters can be provided by manual inserted values or via IN arguments or variables:

Image Added

Parameters:

• Add Group (combo box control) (type: string): choose wheter to add a new group or to remove the group
• Auto Log Off Hunt (combo box control) (type: boolean): specify whether to log off hunt automatically.
• Connection (text box editor type) (type: string): the Cisco Call Manager connection string. The output from "Connect To Cisco Call Manager" activity should be used as Input for this parameter.
• Distribution Algorithm (text box editor type) (type: string): enter the distribution algorithm.
• Hunt Algorithm Busy (text box editor type) (type: string): enter the hunt algorithm when busy.
• Hunt Algorithm No Answer (text box editor type) (type: string): enter the hunt algorithm when no answer. Default value is 'Try next member; then, try next group in Hunt List'
• Hunt Algorithm Not Available (text box editor type) (type: string): enter the hunt algorithm when not available. Default value is 'Try next member; then, try next group in Hunt List'
• Line Group Name (text box editor type) (type: string): enter the line group's name
• Line Selection Order (text box editor type) (type: integer): enter the line selection order
• Member Directory Pattern (text box editor type) (type: string): enter the member directory pattern
• Member Directory Pattern Route Partition Name (text box editor type) (type: string): enter the member directory pattern route partition name
• Other (text box editor type) (type: string/integer): specify other fields if needed. Only string and number values can be used
• Remove Member Directory Pattern (text box editor type) (type: string): enter the member directory pattern which will be removed
• Remove Member Directory Pattern Partition Name (text box editor type) (type: string): enter the member directory pattern partition name which will be removed
• RnaReversionTimeOut (text box editor type) (type: string): enter the RnaReversionTimeOut.

The Read Only Output variable are the possible output values that the activity will provide:

• Output result (type: boolean): outputs the status of the operation: 'True' if succeeded, otherwise 'False'.

Edit Phone

Updates the specified phone's information.

Activity Parameters

The Edit Phone activity parameters can be provided by manual inserted values or via IN arguments or variables:

Image Added

Image Added

Parameters:

• Always Use Prime Line (text box editor type) (type: string): specify the always use prime line option
• Always Use Prime Line For Voice Message (text box editor type) (type: string): specify the always use prime line for voice message option
• Class ID (text box editor type) (type: string): enter the new phone's class ID string
• Common Device Config Name (text box editor type) (type: string): enter the common device config name
• Common Phone Config Name (text box editor type) (type: string): enter the common phone configuration name
• Connection (text box editor type) (type: string): the Cisco Call Manager connection string. The output from "Connect To Cisco Call Manager" activity should be used as Input for this parameter.
• Default Profile Name (text box editor type) (type: string): enter the default profile name
• Description (text box editor type) (type: string): enter the phone's description
• Device Mobility Mode (text box editor type) (type: string): enter the device mobility mode
• Device Pool Name (text box editor type) (type: string): enter the device pool name
• Location Name (text box editor type) (type: string): enter the location name
  
• Name (text box editor type) (type: string): enter the phone's name.
• Other (text box editor type) (type: string/integer): specify other fields if needed. Only string and number values can be used
• Owner Username (text box editor type) (type: string): enter the owner username
• Phone Template Name (text box editor type) (type: string): enter the phone template name
• Presence Group Name (text box editor type) (type: string): specify the presence group name
• Product ID (text box editor type) (type: string): enter the product ID string
• Protocol (text box editor type) (type: string): enter the new phone's protocol
• Protocol Side (text box editor type) (type: string): enter the new phone's protocol side
• Security Profile Name (text box editor type) (type: string): specify the security profile name
• Soft Key Template Name (text box editor type) (type: string): enter the soft key template name
• Telecaster Service Name (text box editor type) (type: string): enter the telecaster service name e.g. 'logout'
• Use Trusted Relay Point (text box editor type) (type: string): specify the trusted relay point option

The Read Only Output variable are the possible output values that the activity will provide:

• Output result (type: boolean): outputs the status of the operation: 'True' if succeeded, otherwise 'False'.

Get Call Pickup Group

Gets the specified Pickup Group.

Activity Parameters

The Get Call Pickup Group activity parameters can be provided by manual inserted values or via IN arguments or variables:

Image Added

Parameters:

• Call Pickup Group Name (text box editor type) (type: string): enter the name for the call pickup group to be retrieved
• Connection (text box editor type) (type: string): the Cisco Call Manager connection string. The output from "Connect To Cisco Call Manager" activity should be used as Input for this parameter.

The Read Only Output variable are the possible output values that the activity will provide:

• Output Call Pickup Group (type: Collection<KeyValuePair<String,String>>): outputs a collection  of KeyValuePairs containing the Hunt List properties. To use the elements of the collection, use the 'Get KeyValuePair' activity with the keys: 'uuid', 'name', 'description', 'pattern', 'routePartitionName', 'pickupNotification', 'pickupNotification Timer' and 'callInfoForPickupNotification'
• Output Call Pickup Group Members (type: Collection<Collection<Dictionary<String,String>>): outputs a collection of collection of dictionary with the keys and values as string, containing all the information about pick up group and members. The main collection contains a dictionary which has as keys: 'uuid', 'name', 'description', 'pattern', 'route Partition Name', 'pickupNotification', 'pickupNotificationTimer' and 'callInfoForPickupNotification', the members collections contains a dictionary which has as keys: 'uuid', 'priority', 'pickupGroupName'.

Get Device Profile

Gets the specified device profile's information.

Activity Parameters

The Get Device Profile activity parameters can be provided by manual inserted values or via IN arguments or variables:

Image Added

Parameters:

• Connection (text box editor type) (type: string): the Cisco Call Manager connection string. The output from "Connect To Cisco Call Manager" activity should be used as Input for this parameter.
• Device Profile Name (text box editor type) (type: string): enter the name for the device profile to be retrieved.

The Read Only Output variable are the possible output values that the activity will provide:

• Output Device Profile (type: Collection<KeyValuePair<String,String>>): outputs a collection of KeyValuePairs containing the Device Profile properties. To use the elements of the collection, use the 'Get KeyValuePair' activity with the keys: 'uuid', 'name', 'description', 'product', 'model', 'class', 'protocol', 'type', 'protocolSide', 'disableSpeaker', 'pcPort' and 'phoneTemplateName'.

Get Hunt List

Gets the specified hunt list's information.

Activity Parameters

The Get Hunt List activity parameters can be provided by manual inserted values or via IN arguments or variables:

Image Added

Parameters:

• Connection (text box editor type) (type: string): the Cisco Call Manager connection string. The output from "Connect To Cisco Call Manager" activity should be used as Input for this parameter.
• Hunt List Name (text box editor type) (type: string): enter the name for the hunt list to be retrieved.

The Read Only Output variable are the possible output values that the activity will provide:

• Output Hunt Collection (type: Collection<Collection<Dictionary<String,String>>): outputs a collection of collection of dictionaries containing the complete Hunt properties. To use the elements of the collection, for the main collection, use the 'GetDictionaryValue' activity with the keys: 'uuid','name', 'description', 'callManagerGroupName', 'routeListEnabled' and 'voiceMailUsage' and for the members collections use as keys: 'uuid', 'lineGroupName', 'selectionOrder'.
• Output Hunt List (type: Collection<KeyValuePair<String,String>>): outputs a collection of KeyValuePairs containing the Hunt List properties. To use the elements of the collection, use the 'Get KeyValuePair' activity with the keys: 'uuid', 'name', 'description', 'callManagerGroupName', 'routeListEnabled' and 'voiceMailUsage

Get Hunt Pilot

Gets the specified hunt pilot's information.

Activity Parameters

The Get Hunt Pilot activity parameters can be provided by manual inserted values or via IN arguments or variables:

Image Added

Parameters:

• Connection (text box editor type) (type: string): the Cisco Call Manager connection string. The output from "Connect To Cisco Call Manager" activity should be used as Input for this parameter.
• Hunt Pilot Name (text box editor type) (type: string): enter the name for the hunt pilot to be retrieved.
• Pattern (text box editor type) (type: string): enter the pattern for the hunt pilot to be retrieved e.g. '\+5673947264'
• RoutePartitionName (text box editor type) (type: string): enter the route partition name for the hunt pilot to be retrieved e.g. 'test-devices'.

The Read Only Output variable are the possible output values that the activity will provide:

• Output Hunt Pilot (type: Collection<KeyValuePair<String,String>>): outputs a collection of KeyValuePairs containing the Hunt List properties. To use the elements of the collection, use the 'Get KeyValuePair' activity with the keys: 'uuid', 'pattern', 'description', 'routePartitionName', 'blockEnable', 'calledPartyTransformationMask', 'callingPartyTransformationMask', 'useCallingPartyPhoneMask', 'callingPartyPrefixDigits', 'dialPlanName', 'patternUrgency', 'routeFilterName', 'provideOutsideDialtone', 'huntListName', 'alertingName', 'callPickupGroupName', 'releaseClause' and 'displayConnectedNumber'
• Output Hunt Pilot Collection (type: Collection<Collection<Dictionary<String,String>>): outputs a collection of collection of dictionaries containing the Hunt properties. To use the elements of the collection, use the collection, use the 'GetDictionaryValue' activity with the keys: 'uuid', 'pattern', 'description', 'routePartitionName', 'blockEnable', 'calledPartyTransformationMask', 'callingPartyTransformationMask', 'useCallingPartyPhoneMask', 'callingPartyPrefixDigits', 'dialPlanName', 'patternUrgency', 'routeFilterName', 'provideOutsideDialtone', 'huntListName', 'alertingName', 'callPickupGroupName', 'releaseClause' and 'displayConnectedNumber' and for the members collections use the keys: 'parkMonForwardNoRetrieveusePersonalPreferences', 'parkMonForwardNoRetrievedestination', 'forwardHuntBusy callingSearchSpaceName'.

Get Line

Gets the specified line.

Activity Parameters

The Get Line activity parameters can be provided by manual inserted values or via IN arguments or variables:

Image Added

Parameters:

• Connection (text box editor type) (type: string): the Cisco Call Manager connection string. The output from "Connect To Cisco Call Manager" activity should be used as Input for this parameter.
• Line pattern (text box editor type) (type: string): enter the pattern for the line to be retrieved.
• Route Partition Name (text box editor type) (type: string): enter the route partition name.

The Read Only Output variable are the possible output values that the activity will provide:

• Output Line (type: Collection<KeyValuePair<String,String>>): outputs a collection of KeyValuePairs containing the line properties. To use the elements of the collection, use the 'Get KeyValuePair' activity with the keys: 'uuid', 'description', 'active', 'routePartitionName', 'callForwardAll', 'callForwardBusy', 'callForwardNoAnswer', 'callForwardNoCoverage', 'callForwardOnFailure', 'callForwardNotRegistered', 'callPickupGroupName', 'autoAnswer', 'alertingName', 'presenceGroupName' and 'rejectAnonymousCall'.
• Output Line Content (type: Collection<Collection<Dictionary<String,String>>): outputs a collection of collections of dictionaries containing the complete line properties. To use the elements of the collection, firstly use the 'Get KeyValuePairElement from Collection' activity to retrieve one collection, then use the 'GetDictionary Value' activity with the keys: 'uuid', 'patterndescription', 'descriptionactive', 'routePartitionName', 'blockEnablecallForwardAll', 'calledPartyTransformationMaskcallForwardBusy', 'callingPartyTransformationMaskcallForwardNoAnswer', 'useCallingPartyPhoneMaskcallForwardNoCoverage', 'callingPartyPrefixDigitscallForwardOnFailure', 'dialPlanNamecallForwardNoRegistered', 'patternUrgency', 'routeFilterName', 'provideOutsideDialtone', 'huntListNamecallPickupGroupName', 'alertingNameautoAnswer', 'callPickupGroupNamealertingName', 'releaseClausepresenceGroupName' and 'displayConnectedNumberrejectAnonymousCall'.

Get Line Group

Gets the specified line group.

Activity Parameters

The Get Line Group activity parameters can be provided by manual inserted values or via IN arguments or variables:

Image RemovedImage Added

Parameters:

• Connection (text box editor type) (type: string): the Cisco Call Manager connection string. The output from "Connect To Cisco Call Manager" activity should be used as Input for this parameter.
• Line pattern Group Name (text box editor type) (type: string): enter the pattern name for the line group to be retrieved.

The Read Only Output variable are the possible output values that the activity will provide:

• Output Line Group (type: Collection<KeyValuePair<String,String>>): outputs a collection of KeyValuePairs containing the line containing the Hunt List properties. To use the elements of the collection, use the 'Get KeyValuePair' activity with the keys: 'uuid', 'name', 'distributionAlgorithm', 'rnaReversionTimeOut', 'huntAlgorithmNoAnswer', 'huntAlgorithmBusy', huntAlgorithmNotAVailable' and 'autoLogOffHunt'.
• Output Line Group Content (type: Collection<Collection<Dictionary<String,String>> ): outputs a collection of collections of dictionaries containing the complete Hunt List properties. To use the elements of the collection, firstly use the 'Get KeyValuePairElement from Collection' activity to retrieve one collection, then use the 'GetDictionaryValue' activity with the keys: 'uuid', 'descriptionname', 'activedistributionAlgorithm', 'routePartitionNamernaReversionTimeOut', 'callForwardAllhuntAlgorithmNoAnswer', 'callForwardBusyhuntAlgorithmBusy', 'callForwardNoAnswerhuntAlgorithmNotAvailable', 'callForwardNoCoverageautoLogOffHunt', 'callForwardOnFailurefor the members children you can use 'uuid', 'callForwardNotRegisteredlineSelectionOrder', 'callPickupGroupNamedirectoryNumber UUID', 'autoAnswerdirectoryNumberPattern', 'alertingName', 'presenceGroupName' and 'rejectAnonymousCalldirectoryNumberroutePartition'.

Get

...

Phone

Gets the specified line groupphone's information.

Activity Parameters

The Get Line Group Phone activity parameters can be provided by manual inserted values or via IN arguments or variables:

Image RemovedImage Added

Parameters:

• Connection (text box editor type) (type: string): the Cisco Call Manager connection string. The output from "Connect To Cisco Call Manager" activity should be used as Input for this parameter.
• Line Group Phone Name (text box editor type) (type: string): enter the name for the line group phone to be retrieved.

The Read Only Output variable are the possible output values that the activity will provide:

• Output Line Group Phone (type: Collection<KeyValuePair<String,String>>): outputs a collection of KeyValuePairs containing the Hunt List properties. To use the elements of the collection, use the 'Get KeyValuePair' activity with the keys: 'uuid'uuid', 'name', 'description', 'product', 'nameclass', 'distributionAlgorithmprotocol', 'rnaReversionTimeOutprotocolSide', 'huntAlgorithmNoAnswerdevicePoolName', 'huntAlgorithmBusylocationName', huntAlgorithmNotAVailable ' and sendGeoLocation'autoLogOffHunt'.

Get Phone

Gets the specified phone's information.

Activity Parameters

The Get Phone activity parameters can be provided by manual inserted values or via IN arguments or variables:

Image Removed

Parameters:

• Connection (text box editor type) (type: string): the Cisco Call Manager connection string. The output from "Connect To Cisco Call Manager" activity should be used as Input for this parameter.
• Phone Name (text box editor type) (type: string): enter the name for the phone to be retrieved.

The Read Only Output variable are the possible output values that the activity will provide:

• Output Phone (type: Collection<KeyValuePair<String, 'geoLocationName', 'phoneTemplateName', 'remoteDevice', 'dndStatus', 'isActive', 'isDualMode', 'isProtected' and 'mtpRequired'.
• Output Phone Collection (type: Collection<Collection<Dictionary<String,String>>): outputs a collection of KeyValuePairs collection od dictionaries containing the Hunt Phone List properties. To use the elements of the collection, firstly use the 'Get KeyValuePairElement from Collection' activity to retrieve one collection, then use the 'GetDictionaryValue' activity with the keys: 'uuid', 'name', 'description', 'product', 'class', 'protocol', 'protocolSide', 'devicePoolName', 'locationName', 'sendGeoLocation', 'geoLocationName', 'phoneTemplateName', 'remoteDevice', 'dndStatus', 'isActive', 'isDualMode', 'isProtected' and 'mtpRequired'.

...