Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 3 Next »

Activities




Set HA state

This activity enables High Availability for pool.

Activity Parameters

The Set HA state activity parameters can be provided by manual inserted values or via IN arguments or variables:

Parameters:

  • Connection (text box editor type) (type: string): the Citrix Host Session. The Output from Connect to Citrix activity should be used as Input here. 
  • Pool UUID (text box editor type) (type: string): enter the Pool UUID. This parameter can be obtained by using GetPool activity
  • HA enabled (combo box control) (type: string):  specify whether to enable or disable the High Availability

Note:

  • This activity doesn't return any parameter. To get the current HA state you can use GetHAState activity,:

Execution:

Get HA state

This activity returns the state of HA

Activity Parameters

The Get HA state activity parameters can be provided by manual inserted values or via IN arguments or variables:

Parameters:

  • Connection (text box editor type) (type: string): the Citrix Host Session. The Output from Connect to Citrix activity should be used as Input here. 
  • Pool UUID (text box editor type) (type: string): enter the Pool UUID. This parameter can be obtained by using GetPool activity

The Read Only Output parameters block contains the possible output values that the activity will provide:

  • Output state (type: string): outputs the current Ha state e.g. true, false, unknown.



Execution:


Get Maintenance mode

This activity returns the maintenance status of host.

Activity Parameters

The Get Maintenance mode activity parameters can be provided by manual inserted values or via IN arguments or variables:

Parameters:

  • Connection (text box editor type) (type: string): the Citrix Host Session. The Output from Connect to Citrix activity should be used as Input here. 
  • Hostname (text box editor type) (type: string): enter the Hostname  of target machine.  In order to obtain hostname value you can use ListPoolHosts activity.
  • UUID (text box editor type) (type: string): enter the UUID of the host. Takes precedence over the Hostname. In order to obtain the UUID value you can use ListPoolHosts activity

The Read Only Output parameters block contains the possible output values that the activity will provide:

  • Output state (type: string): outputs the current maintenance state e.g. true, false, unknown.


Execution:

Guest ShutDown By Name

This activity shuts down Citrix Guest.

Activity Parameters

The Guest ShutDown By Name activity parameters can be provided by manual inserted values or via IN arguments or variables:

Parameters:

  • Connection (text box editor type) (type: string): the Citrix Host Session. The Output from Connect to Citrix activity should be used as Input here. 
  • VM name (text box editor type) (type: string): enter the VM Name to be shutdown. You can retrieve this parameter by using ListHostVms activity.
  • UUID (text box editor type) (type: string): enter the UUID of the VM. Takes precedence over the VM name. In order to obtain the UUID value you can use ListHostVms activity.

The Read Only Output parameters block contains the possible output values that the activity will provide:

  • Output state (type: string): outputs the current power state of VM (on/off).




ShutDown Host By IP

This activity shuts down Citrix Host.

Activity Parameters

The ShutDown Host By IP activity parameters can be provided by manual inserted values or via IN arguments or variables:

Parameters:

  • Connection (text box editor type) (type: string): the Citrix Host Session. The Output from Connect to Citrix activity should be used as Input here. 
  • Hostname or IP (text box editor type) (type: string): enter the Hostname or the IP address of target machine - example: "10.10.10.10" or "Citrix.example.local" to shutdown.  In order to optain hostname value you can use ListPoolHosts activity.
  • UUID (text box editor type) (type: string): enter the UUID of the host. Takes precedence over the Hostname. In order to obtain the UUID value you can use ListPoolHosts activity

The Read Only Output parameters block contains the possible output values that the activity will provide:

  • Output state (type: string): outputs the current power state of host (on/off).




Force ShutDown Host By IP

This activity force shuts down Citrix Host.

Activity Parameters

The Force ShutDown Host By IP activity parameters can be provided by manual inserted values or via IN arguments or variables:

Parameters:

  • Connection (text box editor type) (type: string): the Citrix Host Session. The Output from Connect to Citrix activity should be used as Input here. 
  • Hostname or IP (text box editor type) (type: string): enter the Hostname or the IP address of target machine - example: "10.10.10.10" or "Citrix.example.local" to shutdown.  In order to obtain hostname value you can use ListPoolHosts activity.
  • UUID (text box editor type) (type: string): enter the UUID of the host. Takes precedence over the Hostname. In order to obtain the UUID value you can use ListPoolHosts activity

The Read Only Output parameters block contains the possible output values that the activity will provide:

  • Output state (type: string): outputs the current power state of host (on/off).



  • No labels