Activities

Add Call Pickup Group

Adds the specified call pickup group.

Activity Parameters

The Add Call Pickup Group activity parameters can be provided by manual inserted values or via IN arguments or variables:

Parameters:

Connection (text box editor type) (type: string): the Cisco Call Manager connection string. The output from "Connect To Cisco Call Manager" activity should be used as Input for this parameter.
Description (text box editor type) (type: string): enter the new call pickup group's description.
Name (text box editor type) (type: string): enter the new call pickup group's name.
Other (text box editor type) (type: string/integer): specify other fields if needed. Only string and number values can be used.
Pattern (text box editor type) (type: string): enter the call pickup group pattern.
Pickup Notification (text box editor type) (type: string): enter the pickup notification.
Pickup Notification Timer (text box editor type) (type: string): enter the pickup notification timer. Default value is '6'.
Route Partition Name (text box editor type) (type: string): enter the route partition name.

The Read Only Output variable are the possible output values that the activity will provide:

Output result (type: boolean): outputs the status result.

Add Device Profile

Adds the specified device profile.

Activity Parameters

The Add Device Profile activity parameters can be provided by manual inserted values or via IN arguments or variables:

Line:

Busy Trigger (text box editor type) (type: integer): enter the busy trigger.
Caller Name (combo box control ) (type: string): set the caller name.
Caller Number (combo box control) (type: string): set the caller number.
Dialed Number (combo box control) (type: string): set the line dialed number.
Directory number UUID (text box editor type) (type: string): enter the directory number UUID.
Display (text box editor type) (type: string): enter the line display.
Display Ascii (text box editor type) (type: string): enter the display ascii.
E164Mask (text box editor type) (type: string): enter the 64 Mask.
Index (text box editor type) (type: string): enter the line index.
Label (text box editor type) (type: string): enter the line label.
Max Number of Calls (text box editor type) (type: string) : enter the max number of calls.
Partition Name (text box editor type) (type: string): enter the partition name.
Partition Name UUID (text box editor type) (type: string): enter the partition name UUID.
Pattern (text box editor type) (type: string): enter the line pattern.
Phone Template Name (text box editor type) (Type: string): enter phone template name.
Redirected Number (combo box control ) (type: string): set the line redirected number.

Parameters:

Class (text box editor type) (type: string): enter the device profile's class.
Connection (text box editor type) (type: string): the Cisco Call Manager connection string. The output from "Connect To Cisco Call Manager" activity should be used as Input for this parameter.
Description (text box editor type) (type: string): enter the device profile's description.
Login User Id (text box editor type) (type: string): enter the login User Id.
Login User UUID (text box editor type) (type: string): enter the login User UUID.
Name (text box editor type) (type: string): enter the device profile's name
Other (text box editor type) (type: string/integer): specify other fields if needed. Only string and number values can be used.
Product (text box editor type) (type: string): enter the device profile's product
Protocol (text box editor type) (type: string): enter the protocol.
Protocol Side (text box editor type) (type: string): enter the protocol side. Default value is 'User'.
TelecasterServiceName (text box editor type) (type: string): enter the TelecasterServiceName e.g. 'logout'.

The Read Only Output variable are the possible output values that the activity will provide:

Output result (type: boolean): outputs the status of the operation. 'True' if succeeded, otherwise 'False'.

Add Hunt List

Adds the specified hunt list.

Activity Parameters

The Add Hunt List activity parameters can be provided by manual inserted values or via IN arguments or variables:

Parameters:

Call Manager Group Name (text box editor type) (type: string): enter the call manager group name.
Connection (text box editor type) (type: string): the Cisco Call Manager connection string. The output from "Connect To Cisco Call Manager" activity should be used as Input for this parameter.
Hunt List Description (text box editor type) (type: string): enter the new hunt list's description.
Hunt List Name (text box editor type) (type: string): enter the new hunt list's name.
Other (text box editor type) (type: string/integer): specify other fields if needed. Only string and number values can be used.
Route List Enabled (combo box control) (type: boolean): specify whether the route list to be enabled.
Voice Mail Usage (combo box control) (type: boolean): specify whether to use voice mail or not.

The Read Only Output variable are the possible output values that the activity will provide:

Output result (type: boolean): outputs the status of the operation: 'True' if succeeded, otherwise 'False'.

Add Hunt Pilot

Adds the specified hunt pilot.

Activity Parameters

The Add Hunt Pilot activity parameters can be provided by manual inserted values or via IN arguments or variables:

Calling Party Transformations:

Calling Line Presentation (text box editor type) (type: string): specify the calling line presentation
Calling Name Presentation (text box editor type) (type: string): specify the calling name presentation
Calling Party Number Type (text box editor type) (type: string): specify the calling party number type. Default is 'Cisco CallManager'
Calling Party Numbering Plan (text box editor type) (type: string): specify the calling party numbering plan. Default is 'Cisco CallManager'

Connected Party Transformations:

Connected Line Presentation (text box editor type) (type: string): specify the connected line presentation
Connected Name Presentation (text box editor type) (type: string): specify the connected name presentation

Parameters:

Alerting Name (text box editor type) (type: string): enter the alerting name.
Block Enabled (combo box control) (type: boolean): specify whether the block to be enabled or not.
Connection (text box editor type) (type: string): the Cisco Call Manager connection string. The output from "Connect To Cisco Call Manager" activity should be used as Input for this parameter.
Description (text box editor type) (type: string): enter the description for the hunt pilot.
Hunt List Name (text box editor type) (type: string): enter the hunt list name.
Hunt Pilot Name (text box editor type) (type: string): enter the new hunt pilot's name.
Other (text box editor type) (type: string/integer): specify other fields if needed. Only string and number values can be used.
Pattern (text box editor type) (type: string): enter the hunt pilot pattern.
Pattern Precedence (text box editor type) (type: string): enter the hunt pilot pattern precedence.
Route Partition Name (text box editor type) (type: string): enter the route partition name.

Queue Calls:

Max Callers in Queue (text box editor type) (type: integer): enter the maximum number of callers allowed in queue. Default value is '32'.
Max Wait Time in Queue (text box editor type) (type: integer): enter the maximum wait time in queue. Default value is '900'.

The Read Only Output variable are the possible output values that the activity will provide:

Output result (type: boolean): outputs the status of the operation: 'True' if succeeded, otherwise 'False'.

Add Line

Adds the specified line.

Activity Parameters

The Add Line activity parameters can be provided by manual inserted values or via IN arguments or variables:

Parameters:

Active (combo box control) (type: boolean): specify whether the line should be active or not. Default value is 'true'.
Alert Name (text box editor) (type: string): enter the alert name.
Call Pickup Group Name (text box editor type)(type: string): enter the Call Pickup Group Name.
Call Pickup Group UUID (text box editor type) (type: string): enter the Call Pickup Group UUID.
Connection (text box editor type) (type: string): the Cisco Call Manager connection string. The output from "Connect To Cisco Call Manager" activity should be used as Input for this parameter.
Description (text box editor type) (type: string): enter the description.
Destination (text box editor type) (type: string): enter the destination.
External Call Control Profile (text box editor type) (type: string): enter the external call control profile e.g. 'ECCP2'
Forward to voice Email(combo box control) (type: string): enable the Forward To Voice Email.
Line Pattern (text box editor type) (type: string): enter the new line's pattern.
Other (text box editor type) (type: string/integer): specify other fields if needed. Only string and number values can be used.
Route Partition Name (text box editor type) (type: string): enter the route partition name.
Search Space Name (text box editor type) (type: string): enter the Search Space Name.
Search Space Name UUID (text box editor type) (type: string): enter the Search Space Name UUID.
Share Line Appearance Css Name (text box editor type) (type: string): enter the Share Line Appearance Css Name.
Share Line Appearance Css UUID (text box editor type) (type: string): enter the Share Line Appearance Css UUID.

The Read Only Output variable are the possible output values that the activity will provide:

Output Result (type: boolean): outputs the status of the operation: 'True' if succeeded, otherwise 'False'.

Add Line Group

Adds the specified line group.

Activity Parameters

The Add Line Group activity parameters can be provided by manual inserted values or via IN arguments or variables:

Parameters:

Auto Log Off Hunt (combo box control) (type: boolean): specify whether to log off hunt automatically. Default value is 'false'.
Connection (text box editor type) (type: string): the Cisco Call Manager connection string. The output from "Connect To Cisco Call Manager" activity should be used as Input for this parameter.
Distribution Algorithm (text box editor type) (type: string): enter the distribution algorithm. Default value is 'Longest Idle Time'.
Hunt Algorithm Busy (text box editor type) (type: string): enter the hunt algorithm when busy. Default value is 'Try next member; then, try next group in Hunt List'
Hunt Algorithm No Answer (text box editor type) (type: string): enter the hunt algorithm when no answer. Default value is 'Try next member; then, try next group in Hunt List'
Hunt Algorithm Not Available (text box editor type) (type: string): enter the hunt algorithm when not available. Default value is 'Try next member; then, try next group in Hunt List'
Line Group Name (text box editor type) (type: string): enter the new line group's name
Other (text box editor type) (type: string/integer): specify other fields if needed. Only string and number values can be used
RnaReversionTimeOut (text box editor type) (type: string): enter the rnaReversionTimeOut. Default is 10.

The Read Only Output variable are the possible output values that the activity will provide:

Output result (type: boolean): outputs the status of the operation: 'True' if succeeded, otherwise 'False'.

Add Phone

Adds the specified phone.

Activity Parameters

The Add Phone activity parameters can be provided by manual inserted values or via IN arguments or variables:

Line:

Busy Trigger (text box editor type) (type: integer): enter the busy trigger.
Caller Name (combo box control type) (type: string): set the caller name.
Caller Number (combo box control) (type: string): set the caller number.
Dialed Number (combo box control) (type: string): set the line dialed number.
Directory number UUID (text box editor type) (type: string): enter the directory number UUID.
Display (text box editor type) (type: string): enter the line display.
Display Ascii (text box editor type) (type: string): enter the display ascii.
E164Mask (text box editor type) (type: string): enter the 64 Mask.
Index (text box editor type) (type: string): enter the line index.
Label (text box editor type) (type: string): enter the line label.
Max Number of Calls (text box editor type) (type: string) : enter the max number of calls.
Partition Name (text box editor type) (type: string): enter the partition name.
Partition Name UUID (text box editor type) (type: string): enter the partition name UUID.
Pattern (text box editor type) (type: string): enter the line pattern.
Redirected Number (combo box control ) (type: string): set the line redirected number.

Parameters:

Always Use Prime Line (text box editor type) (type: string): specify the always use prime line option
Always Use Prime Line For Voice Message (text box editor type) (type: string): specify the always use prime line for voice message option
Class ID (text box editor type) (type: string): enter the new phone's class ID string
Common Phone Config Name (text box editor type) (type: string): enter the common phone configuration name
Common Device Config UUID (text box editor type) (type: string): enter the common device config UUID
Common Phone Config Name (text box editor type) (type: string): enter the common phone configuration name
Connection (text box editor type) (type: string): the Cisco Call Manager connection string. The output from "Connect To Cisco Call Manager" activity should be used as Input for this parameter.
Default Profile Name (text box editor type) (type: string): enter the default profile name
Description (text box editor type) (type: string): enter the new phone's description
Device Mobility Mode (text box editor type) (type: string): enter the device mobility mode
Device Pool Name (text box editor type) (type: string): enter the device pool name
Device Pool UUID (text box editor type) (type: string): enter the device pool UUID
Location Name (text box editor type) (type: string): enter the location name
Location UUID (text box editor type) (type: string): enter the location UUID
Name (text box editor type) (type: string): enter the new phone's name. Only URL-friendly characters are allowed
Other (text box editor type) (type: string/integer): specify other fields if needed. Only string and number values can be used
Phone Template Name (text box editor type) (type: string): enter the phone template name
Presence Group Name (text box editor type) (type: string): specify the presence group name
Product ID (text box editor type) (type: string): enter the product ID string
Protocol (text box editor type) (type: string): enter the new phone's protocol
Protocol Side (text box editor type) (type: string): enter the new phone's protocol side
Security Profile Name (text box editor type) (type: string): specify the security profile name
Subscribe Calling Search Space Name (text box editor type) (type: string): enter the Subscribe Calling Search Space Name
Subscribe Calling Search Space UUID (text box editor type) (type: string): enter the Subscribe Calling Search Space UUID
Use Trusted Relay Point (text box editor type) (type: string): specify the trusted relay point option

The Read Only Output variable are the possible output values that the activity will provide:

Output result (type: boolean): outputs the status of the operation: 'True' if succeeded, otherwise 'False'.

Connect To Cisco Call Manager

Connects and returns a Cisco Call Manager connection.

Activity Parameters

The Connect To Cisco Call Manager activity parameters can be provided by manual inserted values or via IN arguments or variables:

Authentication:

Use SSL (combo box control) (type: boolean): specify whether to use SSL or not

Parameters:

API Host (text box editor type) (type: string): enter the Call Manager API host
API Port (text box editor type) (type: string): enter the Call Manager API port
API Version (text box editor type) (type: string): enter the Call Manager API version
Password (text box editor type) (type: string): enter the user password
Password Binding (text box editor type) (type: string): bind to a variable containing the encrypted password for connection. (This parameter is used only when the user wants to send an encrypted password from outside the task, for example Flowster Studio Portal)
Username (text box editor type) (type: string): enter the username with access to the Cisco Call Manager API

The Read Only Output variable are the possible output values that the activity will provide:

Connection (type: string): outputs the Cisco Call Manager connection. The output from this activity should be used as an input for the Connection parameters, existing in all the activities placed under the 'Cisco Call Manager' category

Disconnect From Call Manager

Disconnects the specified Cisco Call Manager connection.

Activity Parameters

The Disconnect From Call Manager activity parameters can be provided by manual inserted values or via IN arguments or variables:

Parameters:

Connection (text box editor type) (type: string): the Cisco Call Manager connection string. The output from "Connect To Cisco Call Manager" activity should be used as Input for this parameter.

Edit Call Pickup Group

Updates the specified call pickup group.

Activity Parameters

The Edit Call Pickup Group activity parameters can be provided by manual inserted values or via IN arguments or variables:

Parameters:

Connection (text box editor type) (type: string): the Cisco Call Manager connection string. The output from "Connect To Cisco Call Manager" activity should be used as Input for this parameter.
Description (text box editor type) (type: string): enter the call pickup group description
Name (text box editor type) (type: string): enter the call pickup group's name
Other (text box editor type) (type: string/integer): specify other fields if needed. Only string and number values can be used
Pattern (text box editor type) (type: string): enter the call pickup group pattern
Pickup Notification (text box editor type) (type: string): enter the pickup notification
Pickup Notification Timer (text box editor type) (type: string): enter the pickup notification timer. Default value is '6'
Route Partition Name (text box editor type) (type: string): enter the route partition name

The Read Only Output variable are the possible output values that the activity will provide:

Output result (type: boolean): outputs the status of the operation: 'True' if succeeded, otherwise 'False'.

Edit Device Profile

Updates the specified device profile.

Activity Parameters

The Edit Device Profile activity parameters can be provided by manual inserted values or via IN arguments or variables:

Line:

Busy Trigger (text box editor type) (type: integer): enter the busy trigger.
Caller Name (combo box control ) (type: string): set the caller name.
Caller Number (combo box control) (type: string): set the caller number.
Dialed Number (combo box control) (type: string): set the line dialed number.
Directory number UUID (text box editor type) (type: string): enter the directory number UUID.
Display (text box editor type) (type: string): enter the line display.
Display Ascii (text box editor type) (type: string): enter the display ascii.
E164Mask (text box editor type) (type: string): enter the 64 Mask.
Index (text box editor type) (type: string): enter the line index.
Label (text box editor type) (type: string): enter the line label.
Max Number of Calls (text box editor type) (type: string) : enter the max number of calls.
Partition Name (text box editor type) (type: string): enter the partition name.
Partition Name UUID (text box editor type) (type: string): enter the partition name UUID.
Pattern (text box editor type) (type: string): enter the line pattern.
Phone Template Name (text box editor) (type: string): enter the phone template name.
Redirected Number (combo box control ) (type: string): set the line redirected number.

Parameters:

Class (text box editor type) (type: string): enter the device profile's class
Connection (text box editor type) (type: string): the Cisco Call Manager connection string. The output from "Connect To Cisco Call Manager" activity should be used as Input for this parameter.
Description (text box editor type) (type: string): enter the device profile's description
Login User Id (text box editor type) (type: string): enter the login User Id
Login User UUID (text box editor type) (type: string): enter the login User UUID
Name (text box editor type) (type: string): enter the device profile's name
Other (text box editor type) (type: string/integer): specify other fields if needed. Only string and number values can be used.
Product (text box editor type) (type: string): enter the device profile's product
Protocol (text box editor type) (type: string): enter the protocol
Protocol Side (text box editor type) (type: string): enter the protocol side. Default value is 'User'.

The Read Only Output variable are the possible output values that the activity will provide:

Output result (type: boolean): outputs the status of the operation: 'True' if succeeded, otherwise 'False'.

Edit Hunt List

Updates the specified hunt list.

Activity Parameters

The Edit Hunt List activity parameters can be provided by manual inserted values or via IN arguments or variables:

Parameters:

Call Manager Group Name (text box editor type) (type: string): enter the call manager group name
Connection (text box editor type) (type: string): the Cisco Call Manager connection string. The output from "Connect To Cisco Call Manager" activity should be used as Input for this parameter.
Hunt List Description (text box editor type) (type: string): enter the new hunt list's description
Hunt List Name (text box editor type) (type: string): enter the hunt list's name
Other (text box editor type) (type: string/integer): specify other fields if needed. Only string and number values can be used
Route List Enabled (combo box control) (type: boolean): specify whether the route list to be enabled or not
Voice Mail Usage (combo box control) (type: boolean): specify whether to use voice mail or not

The Read Only Output variable are the possible output values that the activity will provide:

Output result (type: boolean): outputs the status of the operation: 'True' if succeeded, otherwise 'False'.

Edit Hunt Pilot

Updates the specified hunt pilot.

Activity Parameters

The Edit Hunt Pilot activity parameters can be provided by manual inserted values or via IN arguments or variables:

Calling Party Transformations:

Calling Line Presentation (text box editor type) (type: string): specify the calling line presentation
Calling Name Presentation (text box editor type) (type: string): specify the calling name presentation
Calling Party Number Type (text box editor type) (type: string): specify the calling party number type. Default is 'Cisco CallManager'
Calling Party Numbering Plan (text box editor type) (type: string): specify the calling party numbering plan. Default is 'Cisco CallManager'

Connected Party Transformations:

Connected Line Presentation (text box editor type) (type: string): specify the connected line presentation
Connected Name Presentation (text box editor type) (type: string): specify the connected name presentation

Parameters:

Alerting Name (text box editor type) (type: string): enter the alerting name.
Block Enabled (combo box control) (type: boolean): specify whether the block to be enabled or not.
Connection (text box editor type) (type: string): the Cisco Call Manager connection string. The output from "Connect To Cisco Call Manager" activity should be used as Input for this parameter.
Description (text box editor type) (type: string): enter the description for the hunt pilot.
Hunt List Name (text box editor type) (type: string): enter the hunt list name.
Hunt Pilot Name (text box editor type) (type: string): enter the new hunt pilot's name.
Other (text box editor type) (type: string/integer): specify other fields if needed. Only string and number values can be used.
Pattern (text box editor type) (type: string): enter the hunt pilot pattern.
Pattern Precedence (text box editor type) (type: string): enter the hunt pilot pattern precedence.
Route Partition Name (text box editor type) (type: string): enter the route partition name.

Queue Calls:

Max Callers in Queue (text box editor type) (type: integer): enter the maximum number of callers allowed in queue. Default value is '32'.
Max Wait Time in Queue (text box editor type) (type: integer): enter the maximum wait time in queue. Default value is '900'.

The Read Only Output variable are the possible output values that the activity will provide:

Output result (type: boolean): outputs the status of the operation: 'True' if succeeded, otherwise 'False'.

Edit Line

Updates the specified line.

Activity Parameters

The Edit Line activity parameters can be provided by manual inserted values or via IN arguments or variables:

Parameters:

Active (combo box control) (type: boolean): Specify whether the line to be active or not. Default value is 'true'
Alert Name (text box editor type) (type: string): enter the alert name
Call Pickup Group Name (text box editor type) (type: string): enter the Call Pickup Group Name
Call Pickup Group UUID (text box editor type) (type: string):
Connection (text box editor type) (type: string): the Cisco Call Manager connection string. The output from "Connect To Cisco Call Manager" activity should be used as Input for this parameter.
Description (text box editor type) (type: string): enter the description.
Destination (text box editor type) (type: string): enter the destination
Forward to voice Email (combo box control) (type: string): enable the Forward To Voice Email
Line Pattern (text box editor type) (type: string): enter the new line pattern.
Line Uuid (text box editor type) (type: string): enter the uuid for the line to be edited.
Other (text box editor type) (type: string/integer): specify other fields if needed. Only string and number values can be used
Route Partition Name (text box editor type) (type: string): enter the new route partition name.
Search Space Name (text box editor type) (type: string): enter the Search Space Name.
Search Space UUID (text box editor type) (type: string): enter the Search Space UUID.
Share Line Appearance Css Name (text box editor type) (type: string): enter the Share Line Appearance Css Name.
Share Line Appearance Css UUID (text box editor type) (type: string): enter the Share Line Appearance Css UUID.

The Read Only Output variable are the possible output values that the activity will provide:

Output result (type: boolean): outputs the status of the operation: 'True' if succeeded, otherwise 'False'.

Edit Line Group

Updates the specified line group.

Activity Parameters

The Edit Line Group activity parameters can be provided by manual inserted values or via IN arguments or variables:

Parameters:

Add Group (combo box control) (type: string): choose wheter to add a new group or to remove the group
Auto Log Off Hunt (combo box control) (type: boolean): specify whether to log off hunt automatically.
Connection (text box editor type) (type: string): the Cisco Call Manager connection string. The output from "Connect To Cisco Call Manager" activity should be used as Input for this parameter.
Distribution Algorithm (text box editor type) (type: string): enter the distribution algorithm.
Hunt Algorithm Busy (text box editor type) (type: string): enter the hunt algorithm when busy.
Hunt Algorithm No Answer (text box editor type) (type: string): enter the hunt algorithm when no answer. Default value is 'Try next member; then, try next group in Hunt List'
Hunt Algorithm Not Available (text box editor type) (type: string): enter the hunt algorithm when not available. Default value is 'Try next member; then, try next group in Hunt List'
Line Group Name (text box editor type) (type: string): enter the line group's name
Line Selection Order (text box editor type) (type: integer): enter the line selection order
Member Directory Pattern (text box editor type) (type: string): enter the member directory pattern
Member Directory Pattern Route Partition Name (text box editor type) (type: string): enter the member directory pattern route partition name
Other (text box editor type) (type: string/integer): specify other fields if needed. Only string and number values can be used
Remove Member Directory Pattern (text box editor type) (type: string): enter the member directory pattern which will be removed
Remove Member Directory Pattern Partition Name (text box editor type) (type: string): enter the member directory pattern partition name which will be removed
RnaReversionTimeOut (text box editor type) (type: string): enter the RnaReversionTimeOut.

The Read Only Output variable are the possible output values that the activity will provide:

Output result (type: boolean): outputs the status of the operation: 'True' if succeeded, otherwise 'False'.

Edit Phone

Updates the specified phone's information.

Activity Parameters

The Edit Phone activity parameters can be provided by manual inserted values or via IN arguments or variables:

Parameters:

Always Use Prime Line (text box editor type) (type: string): specify the always use prime line option
Always Use Prime Line For Voice Message (text box editor type) (type: string): specify the always use prime line for voice message option
Class ID (text box editor type) (type: string): enter the new phone's class ID string
Common Phone Config Name (text box editor type) (type: string): enter the common phone configuration name
Connection (text box editor type) (type: string): the Cisco Call Manager connection string. The output from "Connect To Cisco Call Manager" activity should be used as Input for this parameter.
Default Profile Name (text box editor type) (type: string): enter the default profile name
Description (text box editor type) (type: string): enter the phone's description
Device Mobility Mode (text box editor type) (type: string): enter the device mobility mode
Device Pool Name (text box editor type) (type: string): enter the device pool name
Location Name (text box editor type) (type: string): enter the location name
Name (text box editor type) (type: string): enter the phone's name.
Other (text box editor type) (type: string/integer): specify other fields if needed. Only string and number values can be used
Phone Template Name (text box editor type) (type: string): enter the phone template name
Presence Group Name (text box editor type) (type: string): specify the presence group name
Product ID (text box editor type) (type: string): enter the product ID string
Protocol (text box editor type) (type: string): enter the new phone's protocol
Protocol Side (text box editor type) (type: string): enter the new phone's protocol side
Security Profile Name (text box editor type) (type: string): specify the security profile name
Use Trusted Relay Point (text box editor type) (type: string): specify the trusted relay point option

The Read Only Output variable are the possible output values that the activity will provide:

Output result (type: boolean): outputs the status of the operation: 'True' if succeeded, otherwise 'False'.

Get Call Pickup Group

Gets the specified Pickup Group.

Activity Parameters

The Get Call Pickup Group activity parameters can be provided by manual inserted values or via IN arguments or variables:

Parameters:

Call Pickup Group Name (text box editor type) (type: string): enter the name for the call pickup group to be retrieved
Connection (text box editor type) (type: string): the Cisco Call Manager connection string. The output from "Connect To Cisco Call Manager" activity should be used as Input for this parameter.

The Read Only Output variable are the possible output values that the activity will provide:

Output Call Pickup Group (type: Collection<KeyValuePair<String,String>>): outputs a collection of KeyValuePairs containing the Hunt List properties. To use the elements of the collection, use the 'Get KeyValuePair' activity with the keys: 'uuid', 'name', 'description', 'pattern', 'routePartitionName', 'pickupNotification', 'pickupNotification Timer' and 'callInfoForPickupNotification'
Output Call Pickup Group Members (type: Collection<Collection<Dictionary<String,String>>): outputs a collection of collection of dictionary with the keys and values as string, containing all the information about pick up group and members. The main collection contains a dictionary which has as keys: 'uuid', 'name', 'description', 'pattern', 'route Partition Name', 'pickupNotification', 'pickupNotificationTimer' and 'callInfoForPickupNotification', the members collections contains a dictionary which has as keys: 'uuid', 'priority', 'pickupGroupName'.

Get Device Profile

Gets the specified device profile's information.

Activity Parameters

The Get Device Profile activity parameters can be provided by manual inserted values or via IN arguments or variables:

Parameters:

Connection (text box editor type) (type: string): the Cisco Call Manager connection string. The output from "Connect To Cisco Call Manager" activity should be used as Input for this parameter.
Device Profile Name (text box editor type) (type: string): enter the name for the device profile to be retrieved.

The Read Only Output variable are the possible output values that the activity will provide:

Output Device Profile (type: Collection<KeyValuePair<String,String>>): outputs a collection of KeyValuePairs containing the Device Profile properties. To use the elements of the collection, use the 'Get KeyValuePair' activity with the keys: 'uuid', 'name', 'description', 'product', 'model', 'class', 'protocol', 'type', 'protocolSide', 'disableSpeaker', 'pcPort' and 'phoneTemplateName'.

Get Hunt List

Gets the specified hunt list's information.

Activity Parameters

The Get Hunt List activity parameters can be provided by manual inserted values or via IN arguments or variables:

Parameters:

Connection (text box editor type) (type: string): the Cisco Call Manager connection string. The output from "Connect To Cisco Call Manager" activity should be used as Input for this parameter.
Hunt List Name (text box editor type) (type: string): enter the name for the hunt list to be retrieved.

The Read Only Output variable are the possible output values that the activity will provide:

Output Hunt Collection (type: Collection<Collection<Dictionary<String,String>>): outputs a collection of collection of dictionaries containing the complete Hunt properties. To use the elements of the collection, for the main collection, use the 'GetDictionaryValue' activity with the keys: 'uuid','name', 'description', 'callManagerGroupName', 'routeListEnabled' and 'voiceMailUsage' and for the members collections use as keys: 'uuid', 'lineGroupName', 'selectionOrder'.
Output Hunt List (type: Collection<KeyValuePair<String,String>>): outputs a collection of KeyValuePairs containing the Hunt List properties. To use the elements of the collection, use the 'Get KeyValuePair' activity with the keys: 'uuid', 'name', 'description', 'callManagerGroupName', 'routeListEnabled' and 'voiceMailUsage

Get Hunt Pilot

Gets the specified hunt pilot's information.

Activity Parameters

The Get Hunt Pilot activity parameters can be provided by manual inserted values or via IN arguments or variables:

Parameters:

Connection (text box editor type) (type: string): the Cisco Call Manager connection string. The output from "Connect To Cisco Call Manager" activity should be used as Input for this parameter.
Hunt Pilot Name (text box editor type) (type: string): enter the name for the hunt pilot to be retrieved.
Pattern (text box editor type) (type: string): enter the pattern for the hunt pilot to be retrieved e.g. '\+5673947264'
RoutePartitionName (text box editor type) (type: string): enter the route partition name for the hunt pilot to be retrieved e.g. 'test-devices'.

The Read Only Output variable are the possible output values that the activity will provide:

Output Hunt Pilot (type: Collection<KeyValuePair<String,String>>): outputs a collection of KeyValuePairs containing the Hunt List properties. To use the elements of the collection, use the 'Get KeyValuePair' activity with the keys: 'uuid', 'pattern', 'description', 'routePartitionName', 'blockEnable', 'calledPartyTransformationMask', 'callingPartyTransformationMask', 'useCallingPartyPhoneMask', 'callingPartyPrefixDigits', 'dialPlanName', 'patternUrgency', 'routeFilterName', 'provideOutsideDialtone', 'huntListName', 'alertingName', 'callPickupGroupName', 'releaseClause' and 'displayConnectedNumber'
Output Hunt Pilot Collection (type: Collection<Collection<Dictionary<String,String>>): outputs a collection of collection of dictionaries containing the Hunt properties. To use the elements of the collection, use the collection, use the 'GetDictionaryValue' activity with the keys: 'uuid', 'pattern', 'description', 'routePartitionName', 'blockEnable', 'calledPartyTransformationMask', 'callingPartyTransformationMask', 'useCallingPartyPhoneMask', 'callingPartyPrefixDigits', 'dialPlanName', 'patternUrgency', 'routeFilterName', 'provideOutsideDialtone', 'huntListName', 'alertingName', 'callPickupGroupName', 'releaseClause' and 'displayConnectedNumber' and for the members collections use the keys: 'parkMonForwardNoRetrieveusePersonalPreferences', 'parkMonForwardNoRetrievedestination', 'forwardHuntBusy callingSearchSpaceName'.

Get Line

Gets the specified line.

Activity Parameters

The Get Line activity parameters can be provided by manual inserted values or via IN arguments or variables:

Parameters:

Connection (text box editor type) (type: string): the Cisco Call Manager connection string. The output from "Connect To Cisco Call Manager" activity should be used as Input for this parameter.
Line pattern (text box editor type) (type: string): enter the pattern for the line to be retrieved.

The Read Only Output variable are the possible output values that the activity will provide:

Output Line (type: Collection<KeyValuePair<String,String>>): outputs a collection of KeyValuePairs containing the line properties. To use the elements of the collection, use the 'Get KeyValuePair' activity with the keys: 'uuid', 'description', 'active', 'routePartitionName', 'callForwardAll', 'callForwardBusy', 'callForwardNoAnswer', 'callForwardNoCoverage', 'callForwardOnFailure', 'callForwardNotRegistered', 'callPickupGroupName', 'autoAnswer', 'alertingName', 'presenceGroupName' and 'rejectAnonymousCall'.
Output Line Content (type: Collection<Collection<Dictionary<String,String>>): outputs a collection of collections of dictionaries containing the complete line properties. To use the elements of the collection, firstly use the 'Get Element from Collection' activity to retrieve one collection, then use the 'GetDictionary Value' activity with the keys: 'uuid', 'description', 'active', 'routePartitionName', 'callForwardAll', 'callForwardBusy', 'callForwardNoAnswer', 'callForwardNoCoverage', 'callForwardOnFailure', 'callForwardNoRegistered', 'callPickupGroupName', 'autoAnswer', 'alertingName', 'presenceGroupName' and 'rejectAnonymousCall'.

Get Line Group

Gets the specified line group.

Activity Parameters

The Get Line Group activity parameters can be provided by manual inserted values or via IN arguments or variables:

Parameters:

Connection (text box editor type) (type: string): the Cisco Call Manager connection string. The output from "Connect To Cisco Call Manager" activity should be used as Input for this parameter.
Line Group Name (text box editor type) (type: string): enter the name for the line group to be retrieved.

The Read Only Output variable are the possible output values that the activity will provide:

Output Line Group (type: Collection<KeyValuePair<String,String>>): outputs a collection of KeyValuePairs containing the Hunt List properties. To use the elements of the collection, use the 'Get KeyValuePair' activity with the keys: 'uuid', 'name', 'distributionAlgorithm', 'rnaReversionTimeOut', 'huntAlgorithmNoAnswer', 'huntAlgorithmBusy', huntAlgorithmNotAVailable' and 'autoLogOffHunt'.
Output Line Group Content (type: Collection<Collection<Dictionary<String,String>> ): outputs a collection of collections of dictionaries containing the complete Hunt List properties. To use the elements of the collection, firstly use the 'Get Element from Collection' activity to retrieve one collection, then use the 'GetDictionaryValue' activity with the keys: 'uuid', 'name', 'distributionAlgorithm', 'rnaReversionTimeOut', 'huntAlgorithmNoAnswer', 'huntAlgorithmBusy', 'huntAlgorithmNotAvailable', 'autoLogOffHunt', for the members children you can use 'uuid', 'lineSelectionOrder', 'directoryNumber UUID', 'directoryNumberPattern', 'directoryNumberroutePartition'.

Get Phone

Gets the specified phone's information.

Activity Parameters

The Get Phone activity parameters can be provided by manual inserted values or via IN arguments or variables:

Parameters:

Connection (text box editor type) (type: string): the Cisco Call Manager connection string. The output from "Connect To Cisco Call Manager" activity should be used as Input for this parameter.
Phone Name (text box editor type) (type: string): enter the name for the phone to be retrieved.

The Read Only Output variable are the possible output values that the activity will provide:

Output Phone (type: Collection<KeyValuePair<String,String>>): outputs a collection of KeyValuePairs containing the Hunt List properties. To use the elements of the collection, use the 'Get KeyValuePair' activity with the keys: 'uuid', 'name', 'description', 'product', 'class', 'protocol', 'protocolSide', 'devicePoolName', 'locationName', 'sendGeoLocation', 'geoLocationName', 'phoneTemplateName', 'remoteDevice', 'dndStatus', 'isActive', 'isDualMode', 'isProtected' and 'mtpRequired'.

Remove Call Pickup Group

Removes the specified call pickup group.

Activity Parameters

The Remove Call Pickup Group activity parameters can be provided by manual inserted values or via IN arguments or variables:

Parameters:

Call Pickup Group Name (text box editor type) (type: string): enter the name for the call pickup group to be deleted.
Connection (text box editor type) (type: string): the Cisco Call Manager connection string. The output from "Connect To Cisco Call Manager" activity should be used as Input for this parameter.

The Read Only Output variable are the possible output values that the activity will provide:

Output result (type: boolean): outputs the status of the operation. 'True' if succeeded, otherwise 'False'.

Remove Device Profile

Removes the specified device profile.

Activity Parameters

The Remove Device Profile activity parameters can be provided by manual inserted values or via IN arguments or variables:

Parameters:

Connection (text box editor type) (type: string): the Cisco Call Manager connection string. The output from "Connect To Cisco Call Manager" activity should be used as Input for this parameter.
Device Profile Name (text box editor type) (type: string): enter the name for the device profile to be deleted.

The Read Only Output variable are the possible output values that the activity will provide:

Output result (type: boolean): outputs the status of the operation. 'True' if succeeded, otherwise 'False'.

Remove Hunt List

Removes the specified hunt list.

Activity Parameters

The Remove Hunt List activity parameters can be provided by manual inserted values or via IN arguments or variables:

Parameters:

Connection (text box editor type) (type: string): the Cisco Call Manager connection string. The output from "Connect To Cisco Call Manager" activity should be used as Input for this parameter.
Hunt List Name (text box editor type) (type: string): enter the name for the hunt list to be deleted.

The Read Only Output variable are the possible output values that the activity will provide:

Output result (type: boolean): outputs the status of the operation. 'True' if succeeded, otherwise 'False'.

Remove Hunt Pilot

Removes the specified hunt pilot.

Activity Parameters

The Remove Hunt Pilot activity parameters can be provided by manual inserted values or via IN arguments or variables:

Parameters:

Connection (text box editor type) (type: string): the Cisco Call Manager connection string. The output from "Connect To Cisco Call Manager" activity should be used as Input for this parameter.
Hunt Pilot Name (text box editor type) (type: string): enter the name for the hunt pilot to be deleted.

The Read Only Output variable are the possible output values that the activity will provide:

Output result (type: boolean): outputs the status of the operation. 'True' if succeeded, otherwise 'False'.

Remove Line

Removes the specified line.

Activity Parameters

The Remove Line activity parameters can be provided by manual inserted values or via IN arguments or variables:

Parameters:

Connection (text box editor type) (type: string): the Cisco Call Manager connection string. The output from "Connect To Cisco Call Manager" activity should be used as Input for this parameter.
Line Uuid (text box editor type) (type: string): enter the uuid for the line to be deleted.

The Read Only Output variable are the possible output values that the activity will provide:

Output result (type: boolean): outputs the status of the operation. 'True' if succeeded, otherwise 'False'.

Remove Line Group

Removes the specified line group.

Activity Parameters

The Remove Line Group activity parameters can be provided by manual inserted values or via IN arguments or variables:

Parameters:

Connection (text box editor type) (type: string): the Cisco Call Manager connection string. The output from "Connect To Cisco Call Manager" activity should be used as Input for this parameter.
Line Group Name (text box editor type) (type: string): enter the name for the line group to be deleted.

The Read Only Output variable are the possible output values that the activity will provide:

Output result (type: boolean): outputs the status of the operation. 'True' if succeeded, otherwise 'False'.