Activities

Add Virtual Harddrive
Add Virtual Network
Clone VM
Compact Virtual Hard Disk
Connect to HyperV
Create New Disk
Create User Role
Create VM
Create VM From Template
Disconnect from HyperV
Delete Checkpoint (Snapshot)
Delete User Role
Delete VM
Expand Virtual Hard Disk
Get User Role
Get VM Host
Get VMs on HyperV
HyperV Apply Checkpoint (Snapshot)
HyperV Edit VM Parameters
HyperV Export VM
HyperV Import VM
List VM Checkpoints (Snapshots)
Merge Virtual Hard Fisk
Mount Virtual Disk
Pause VM on HyperV
Power Off VM on HyperV
Power On VM on HyperV
Reboot VM on HyperV
Remove Network Adapter
Reset VM on HyperV
Save Checkpoint (Snapshot)
Shutdown VM on HyperV
Unmount Virtual Disk
VM Exists
VM Get Memory Usage
VM Get Network Adapter
VM Get Status
VM Get Virtual Hard Disk

Add Virtual Hard Drive

This activity creates a virtual hard drive for the specified VM.

Activity Parameters

The Add Virtual Hard Drive activity parameters can be provided by manual inserted values or via IN arguments or variables:

Parameters:

Address (text box editor type) (type: string): the MAC address.
Network Adapter Name (text box editor type) (type: string): the name of the network adapter.
VHD Name (text box editor type) (type: string): the name of the virtual hard drive.
VM Name (text box editor type) (type: string): the name of the VM to be created.

The Read Only Output variable are the possible output values that the activity will provide:

Created (type: boolean): outputs a bool value indicating if the VM was successfully created.

As mentioned above, the values for all the required parameters can be provided by IN arguments or variables. Below is an example of predefined arguments, ready to be used by the Add Virtual Hard Drive activity:

Add Virtual Network

This activity creates a virtual network for the specified VM.

Activity Parameters

The Add Virtual Network activity parameters can be provided by manual inserted values or via IN arguments or variables:

Parameters:

Address (text box editor type) (type: string): the MAC address.
Network Adapter Name (text box editor type) (type: string): the name of the network adapter.
VM Name (text box editor type) (type: string): the name of the VM to be created.

The Read Only Output variable are the possible output values that the activity will provide:

Created (type: boolean): outputs a bool value indicating if the VM was successfully created.

As mentioned above, the values for all the required parameters can be provided by IN arguments or variables. Below is an example of predefined arguments, ready to be used by the Add Virtual Network activity:

Clone VM

This activity clones a VM on a HyperV host.

Activity Parameters

The Clone VM activity parameters can be provided by manual inserted values or via IN arguments or variables:

Parameters:

Base Machine Name (text box editor type) (type: string): the name of the base virtual machine name.
Machine Folder (text box editor type) (type: string): the full path where the virtual machine will be created.
VM Name (text box editor type) (type: string): the name of the VM to be created.
VM Set Generation Type (combo box control) (type: string): the generation type for the new VM that will be cloned: generation 1 / generation 2.

The Read Only Output variable are the possible output values that the activity will provide:

Created (type: boolean): outputs a bool value indicating if the VM was successfully created.

As mentioned above, the values for all the required parameters can be provided by IN arguments or variables. Below is an example of predefined arguments, ready to be used by the Clone VM activity:

Compact Virtual Hard Disk

This activity compacts a dynamic virtual hard disk file. Compacting is the process of unallocating unused portions of the virtual hard disk.

Activity Parameters

The Compact Virtual Hard Disk activity parameters can be provided by manual inserted values or via IN arguments or variables:

Parameters:

Path (text box editor type) (type: string): the fully qualified path that specifies the location of the merging file.

The Read Only Output variable are the possible output values that the activity will provide:

Output Status (type: boolean): outputs a bool value indicating if the compacting was successfully done.

As mentioned above, the values for all the required parameters can be provided by IN arguments or variables. Below is an example of predefined arguments, ready to be used by the Compact Virtual Hard Disk activity:

Connect To HyperV

This activity connects to a Hyper-V Host. The Output of this activity should be used as Input for all Connection parameters used for all activities found under this category.

Activity Parameters

The Connect to HyperV activity parameters can be provided by manual inserted values or via IN arguments or variables:

Parameters:

Authority (text box editor type) (type: string): leave the default value for this parameter or blank if no authority is required.
Hostname or IP (text box editor type) (type: string): the Hostname or IP address of target machine - example: "\\10.10.10.10\root\virtualization\v2" or "\\ServerName\root\virtualization\v2".
Password (text box editor type) (type: string): the password for the provided username.
Password Binding (text box editor type) (type: string): bind to a variable containing the encrypted password for the HyperV. (This parameter is used only when the user wants to send an encripted password from outside the workflow, for example Flowster Portal).
Username (text box editor type) (type: string): the username for the user to query to the remote computer.

The Read Only Output variable are the possible output values that the activity will provide:

Connection (type: object): outputs a Hyper-V connection. The Output parameter should be used as Input for all Connection parameters of the activities found under HyperV category.

As mentioned above, the values for all the required parameters can be provided by IN arguments or variables. Below is an example of predefined arguments, ready to be used by the Connect to HyperV activity:

Disconnect from HyperV

This activity disconnects from a Hyper-V Host.

Activity Parameters

The Disconnect from HyperV activity parameters can be provided by manual inserted values or via IN arguments or variables:

Parameters:

Connection (text box editor type) (type: object): the Hyper-V Host connection. The Output from Connect to Hyper-V activity should be used as Input here.

Create New Disk

This activity creates a new disk and add it to a virtual machine.

Activity Parameters

The Create New Disk activity parameters can be provided by manual inserted values or via IN arguments or variables:

Parameters:

Base Image Path (text box editor type) (type: string): the full path of base virtual disk image to use.
Disk Type (combo box control) (type: string): the virtual disk type.
New Image Path (text box editor type) (type: string): the full path (with disk image name) of new virtual disk image.
Size (text box editor type) (type: int32): the size of the new virtual disk in GB.

The Read Only Output variable are the possible output values that the activity will provide:

Created (type: boolean): outputs a bool value indicating if the virtual hard disk was successfully created.

As mentioned above, the values for all the required parameters can be provided by IN arguments or variables. Below is an example of predefined arguments, ready to be used by the Create New Disk activity:

Create User Role

This activity creates a new user role on a Hyper-V virtual machine.

Activity Parameters

The Create User Role activity parameters can be provided by manual inserted values or via IN arguments or variables:

Parameters:

Scope Name (text box editor type) (type: string): the authorization scope to use in determining the access control policy for the virtual machine.
VM Name (text box editor type) (type: string): the name of the virtual machine where the new user role will be created.

The Read Only Output variable are the possible output values that the activity will provide:

Output Created (type: boolean): outputs a bool value indicating if the user role was successfully created.

As mentioned above, the values for all the required parameters can be provided by IN arguments or variables. Below is an example of predefined arguments, ready to be used by the Create User Role activity:

Create VM

This activity creates a VM on a HyperV host.

Activity Parameters

The Create VM activity parameters can be provided by manual inserted values or via IN arguments or variables:

Parameters:

VM Name (text box editor type) (type: string): the name of the VM to be created.
VM Set Generation Type (combo box control) (type: string): the generation type for the new VM that will be created: generation 1 / generation 2.

The Read Only Output variable are the possible output values that the activity will provide:

Created (type: boolean): outputs a bool value indicating if the vm was successfully created.

As mentioned above, the values for all the required parameters can be provided by IN arguments or variables. Below is an example of predefined arguments, ready to be used by the Create VM activity:

Create VM From Template

This activity creates a VM on a HyperV host.

Activity Parameters

The Create VM from Template activity parameters can be provided by manual inserted values or via IN arguments or variables:

Parameters:

Source Template Name (text box editor type) (type: string): the name of the virtual machine Template used to create the virtual machine.
VM Name (text box editor type) (type: string): the name of the VM to be created.
VM Set Generation Type (combo box control) (type: string): the generation type for the new VM that will be created: generation 1 / generation 2.

The Read Only Output variable are the possible output values that the activity will provide:

Created (type: boolean): outputs a bool value indicating if the vm was successfully created.

As mentioned above, the values for all the required parameters can be provided by IN arguments or variables. Below is an example of predefined arguments, ready to be used by the Create VM from Template activity:

Delete Checkpoint (Snapshot)

This activity removes the specified checkpoint (snapshot) of the specified VM.

Activity Parameters

The Delete Checkpoint (Snapshot) activity parameters can be provided by manual inserted values or via IN arguments or variables:

Parameters:

Checkpoint (Snapshot) Name (text box editor type) (type: string): the name of the checkpoint (snapshot) which will be deleted.
VM Name(text box editor type) (type: string): the name of virtual machine for which the checkpoint (snapshot) will be deleted.

Execution: the activity will remove the given checkpoint (snapshot) for the given virtual machine.

Delete User Role

This activity deletes a user role on a HyperV virtual machine.

Activity Parameters

The Delete User Role activity parameters can be provided by manual inserted values or via IN arguments or variables:

Parameters:

VM Name (text box editor type) (type: string): the name of the VM.

The Read Only Output variable are the possible output values that the activity will provide:

Output Scope (type: boolean): outputs a value indicating if the user role was successfully deleted.

As mentioned above, the values for all the required parameters can be provided by IN arguments or variables. Below is an example of predefined arguments, ready to be used by the Delete User Role activity:

Delete VM

This activity removes the specified virtual machine.

Activity Parameters

The Delete VM activity parameters can be provided by manual inserted values or via IN arguments or variables:

Parameters:

VM Name (text box editor type) (type: string): the name of virtual machine.

As mentioned above, the values for all the required parameters can be provided by IN arguments or variables. Below is an example of predefined arguments, ready to be used by the Delete VM activity:

Expand Virtual Hard Disk

This activity expands an existing virtual hard disk (.vhd) file.

Activity Parameters

The Expand Virtual Hard Disk activity parameters can be provided by manual inserted values or via IN arguments or variables:

Parameters:

Max Internal Size (text box editor type) (type: int32): the maximum size of the virtual hard disk as viewable by the virtual machine, in bytes. MaxInternalSize minimum value is DiskSize + 512 - (DiskSize mod 512). DiskSize is the disk image file in number of bytes. The InvalidParameter error (32773) is returned if the MaxInternalSize value specified is less than the minimum value.
Path (text box editor type) (type: string): the fully qualified path that specifies the location of the disk image file.

The Read Only Output variable are the possible output values that the activity will provide:

Output Status (type: boolean): outputs a bool value indicating if the expanding was successfully done.

As mentioned above, the values for all the required parameters can be provided by IN arguments or variables. Below is an example of predefined arguments, ready to be used by the Expand Virtual Hard Disk activity:

Get User Role

This activity gets the user role of a HyperV virtual machine.

Activity Parameters

The Get User Role activity parameters can be provided by manual inserted values or via IN arguments or variables:

Parameters:

VM Name (text box editor type) (type: string): the name of the VM.

The Read Only Output variable are the possible output values that the activity will provide:

Output Scope (type: string): outputs the Scope of Residence value.

As mentioned above, the values for all the required parameters can be provided by IN arguments or variables. Below is an example of predefined arguments, ready to be used by the Get User Role activity:

Get VM Host

This activity gets the host of a HyperV virtual machine.

Activity Parameters

The Get VM Host activity parameters can be provided by manual inserted values or via IN arguments or variables:

Parameters:

VM Name (text box editor type) (type: string): the name of the VM.

The Read Only Output variable are the possible output values that the activity will provide:

Output Host (type: string): outputs the host name.

As mentioned above, the values for all the required parameters can be provided by IN arguments or variables. Below is an example of predefined arguments, ready to be used by the Get VM Host activity:

Get VMs on HyperV

This activity gets and returns all registered Virtual Machines on a Hyper-V Host.

Activity Parameters

The Get VMs on HyperV activity parameters can be provided by manual inserted values or via IN arguments or variables:

Parameters:

Connection (text box editor type) (type: string): the Hyper-V Host connection. The Output from Connect to Hyper-V activity should be used as Input here.

The Read Only Output variable are the possible output values that the activity will provide:

Output (type: collection<string>): outputs a collection of all VMs from a HyperV host.To use the elements of the collection, use Get Element From Collection activity.

HyperV Apply Checkpoint (Snapshot)

This activity applies the specified checkpoint (snapshot) to the specified VM.

Activity Parameters

The HyperV Apply Checkpoint (Snapshot) activity parameters can be provided by manual inserted values or via IN arguments or variables:

Parameters:

Apply Latest (combo box control) (type: string): if set to yes, it will apply the last snapshot created. If set to No, then the checkpoint name parameter must be provided.
Checkpoint (Snapshot) Name (text box editor type) (type: string): if Apply Latest set to No, this snapshot will be applied, otherwise this parameter is ignored.
VM Name (text box editor type) (type: string): the name of virtual machine for which the checkpoint will be applied.

Execution: the activity will apply the latest or the provided checkpoint to the selected virtual machine.

HyperV Edit VM Parameters

This activity modify a specified VM's parameters.

Activity Parameters

The HyperV Edit VM Parameters activity parameters can be provided by manual inserted values or via IN arguments or variables:

Parameters:

New VM Name (text box editor type) (type: string): the new name for the VM, if you do not wish to edit it, leave empty.
VM Name (text box editor type) (type: string): the name of the VM to be edited.

As mentioned above, the values for all the required parameters can be provided by IN arguments or variables. Below is an example of predefined arguments, ready to be used by the HyperV Edit VM Parameters activity:

HyperV Export VM

This activity exports a virtual computer system, or a snapshot of a virtual computer system, in the 'powered off' or 'saved' state to a file.

Activity Parameters

The HyperV Export VM activity parameters can be provided by manual inserted values or via IN arguments or variables:

Parameters:

Folder (text box editor type) (type: string): the folder path from the HyperV host machine to which to save the exported VM.
VM Name (text box editor type) (type: string): the name of virtual machine to export.

As mentioned above, the values for all the required parameters can be provided by IN arguments or variables. Below is an example of predefined arguments, ready to be used by the HyperV Export VM activity:

HyperV Import VM

This activity imports a virtual computer system. The resulting virtual computer system will be in the Disabled state.

Activity Parameters

The HyperV Import VM activity parameters can be provided by manual inserted values or via IN arguments or variables:

Parameters:

Import Directory (text box editor type) (type: string): the folder from which to import the VM (path relative to the HyperV Host machine).
Import VM Name (text box editor type) (type: string): the name for the imported VM.
Root Directory (text box editor type) (type: string): the folder to which to store the imported VM.
Target Connection (text box editor type) (type: string): the Hyper-V Host connection to which the specified VM will be imported. The Output from Connect to Hyper-V activity should be used as Input here.

As mentioned above, the values for all the required parameters can be provided by IN arguments or variables. Below is an example of predefined arguments, ready to be used by the HyperV Import VM activity:

List VM Checkpoints (Snapshots)

This activity retrieves all checkpoints (snapshots) belonging to a specified VM.

Activity Parameters

The List VM Checkpoints (Snapshots) activity parameters can be provided by manual inserted values or via IN arguments or variables:

Parameters:

VM Name (text box editor type) (type: string): the name of virtual machine for which the checkpoints will be listed.

The Read Only Output variable are the possible output values that the activity will provide:

Checkpoints (Snapshots) List (type: collection<ManagementObject>): outputs a collection of all available checkpoints (snapshots).
Checkpoints (Snapshots) Names List (type: collection<string>): outputs only the names of the checkpoints (snapshots) contained in Checkpoint List.

Execution: the activity will list all available checkpoints for the provided virtual machine:

Merge Virtual Hard Disk

This activity merges a differencing virtual hard disk file with its parents. If the user executing this function does not have permission to update the virtual machines, then this function will fail.

Activity Parameters

The Merge Virtual Hard Disk activity parameters can be provided by manual inserted values or via IN arguments or variables:

Parameters:

Destination Path (text box editor type) (type: string): the fully qualified path that specifies the location of the parent disk image file into which data is to be merged. This could be the immediate parent virtual disk image of the merging file or parent disk image few levels up the differencing drive chain.
Source Path (text box editor type) (type: string): the fully qualified path that specifies the location of the merging file.

The Read Only Output variable are the possible output values that the activity will provide:

Output Status (type: boolean): outputs a bool value indicating if the merge was successfully done.

As mentioned above, the values for all the required parameters can be provided by IN arguments or variables. Below is an example of predefined arguments, ready to be used by the Merge Virtual Hard Disk activity:

Mount Virtual Disk

This activity mounts a virtual disk image file.

Activity Parameters

The Mount Virtual Disk activity parameters can be provided by manual inserted values or via IN arguments or variables:

Parameters:

Path (text box editor type) (type: string): the fully qualified path that specifies the location of the disk image file.

The Read Only Output variable are the possible output values that the activity will provide:

Output (type: boolean): outputs 'true' if the specified virtual disk was mounted, otherwise 'false'.

As mentioned above, the values for all the required parameters can be provided by IN arguments or variables. Below is an example of predefined arguments, ready to be used by the Mount Virtual Disk activity:

Pause VM on HyperV

This activity pauses a specified virtual machine on a Hyper-V Host.

Activity Parameters

The Pause VM on HyperV activity parameters can be provided by manual inserted values or via IN arguments or variables:

Parameters:

VM Name (text box editor type) (type: string): the name of virtual machine to Pause.

As mentioned above, the values for all the required parameters can be provided by IN arguments or variables. Below is an example of predefined arguments, ready to be used by the Pause VM on HyperV activity:

Power Off VM on HyperV

This activity powers off a specified virtual machine on a Hyper-V Host.

Activity Parameters

The Power Off VM on HyperV activity parameters can be provided by manual inserted values or via IN arguments or variables:

Parameters:

VM Name (text box editor type) (type: string): the name of virtual machine to power off.

As mentioned above, the values for all the required parameters can be provided by IN arguments or variables. Below is an example of predefined arguments, ready to be used by the Power Off VM on HyperV activity:

Power On VM on HyperV

This activity powers on a specified virtual machine on a Hyper-V Host.

Activity Parameters

The Power On VM on HyperV activity parameters can be provided by manual inserted values or via IN arguments or variables:

Parameters:

VM Name (text box editor type) (type: string): the name of virtual machine to power on.

As mentioned above, the values for all the required parameters can be provided by IN arguments or variables. Below is an example of predefined arguments, ready to be used by the Power On VM on HyperV activity:

Reboot VM on HyperV

This activity reboots the guest operating system of a specified virtual machine on a Hyper-V Host.

Activity Parameters

The Reboot VM on HyperV activity parameters can be provided by manual inserted values or via IN arguments or variables:

Parameters:

VM Name (text box editor type) (type: string): the name of virtual machine to reboot.

As mentioned above, the values for all the required parameters can be provided by IN arguments or variables. Below is an example of predefined arguments, ready to be used by the Reboot VM on HyperV activity:

Remove Network Adapter

This activity removes the specified Network Adapter of the specified VM.

Activity Parameters

The Remove Network Adapter activity parameters can be provided by manual inserted values or via IN arguments or variables:

Parameters:

Network Adapter Name (text box editor type) (type: string): the Network Adapter name.
VM Name (text box editor type) (type: string): the name of virtual machine.

Reset VM on HyperV

This activity resets a virtual machine on a Hyper-V Host.

Activity Parameters

The Reset VM on HyperV activity parameters can be provided by manual inserted values or via IN arguments or variables:

Parameters:

VM Name (text box editor type) (type: string): the name of virtual machine to reset.

As mentioned above, the values for all the required parameters can be provided by IN arguments or variables. Below is an example of predefined arguments, ready to be used by the Reset VM on HyperV activity:

Save Checkpoint (Snapshot)

This activity saves the current state of a specified virtual machine.

Activity Parameters

The Save Checkpoint (Snapshot) activity parameters can be provided by manual inserted values or via IN arguments or variables:

Parameters:

VM Name (text box editor type) (type: string): the name of virtual machine for which a new checkpoint (snapshot) will be created.

Execution: the activity will save a new checkpoint (snapshot) for the provided virtual machine.

Shutdown VM on HyperV

This activity shuts down the guest operating system of a specified virtual machine on an Hyper-V Host.

Activity Parameters

The Shutdown VM on HyperV activity parameters can be provided by manual inserted values or via IN arguments or variables:

Parameters:

Vm Name (text box editor type) (type: string): the name of virtual machine.

As mentioned above, the values for all the required parameters can be provided by IN arguments or variables. Below is an example of predefined arguments, ready to be used by the Shutdown VM on HyperV activity:

Unmount Virtual Disk

This activity unmounts a virtual disk image file.

Activity Parameters

The Unmount Virtual Disk activity parameters can be provided by manual inserted values or via IN arguments or variables:

Parameters:

Path (text box editor type) (type: string): the fully qualified path that specifies the location of the disk image file.

The Read Only Output variable are the possible output values that the activity will provide:

Output (type: boolean): outputs 'true' if the specified virtual disk was deleted, otherwise 'false'.

As mentioned above, the values for all the required parameters can be provided by IN arguments or variables. Below is an example of predefined arguments, ready to be used by the Unmount Virtual Disk activity:

VM Exists

This activity verifies if the specified virtual machine exists.

Activity Parameters

The VM Exists activity parameters can be provided by manual inserted values or via IN arguments or variables:

Parameters:

Vm Name (text box editor type) (type: string): the name of virtual machine.

The Read Only Output variable are the possible output values that the activity will provide:

Output (type: boolean): outputs 'true' if the specified VM exists, otherwise 'false'.

As mentioned above, the values for all the required parameters can be provided by IN arguments or variables. Below is an example of predefined arguments, ready to be used by the VM Exists activity:

VM Get Memory Usage

This activity retrieves the current memory usage of the specified virtual system.

Activity Parameters

The VM Get Memory Usage activity parameters can be provided by manual inserted values or via IN arguments or variables:

Parameters:

VM Name (text box editor type) (type: string): the name of virtual machine.

As mentioned above, the values for all the required parameters can be provided by IN arguments or variables. Below is an example of predefined arguments, ready to be used by the VM Get Network Adapter activity:

The Read Only Output variable are the possible output values that the activity will provide:

Output Usage (type: string): outputs the current memory usage of the virtual system in MB.
Output Available Memory (type: string): outputs the current available memory on the virtual machine.

VM Get Network Adapter

This activity retrieves an existing Virtual Network Adapter based on the filters you specify.

Activity Parameters

The VM Get Network Adapter activity parameters can be provided by manual inserted values or via IN arguments or variables:

Parameters:

VM Name (text box editor type) (type: string): the name of virtual machine.

As mentioned above, the values for all the required parameters can be provided by IN arguments or variables. Below is an example of predefined arguments, ready to be used by the VM Get Network Adapter activity:

The Read Only Output variable are the possible output values that the activity will provide:

Output (type: collection<collection<string>>): outputs the address of the resource. For example, the MAC address of a Ethernet port.
Output MAC Address (type: string): outputs the address of the resource. For example, the MAC address of a Ethernet port.

VM Get Status

This activity retrieves the state and other related information about a virtual machine.

Activity Parameters

The VM Get Status activity parameters can be provided by manual inserted values or via IN arguments or variables:

Parameters:

VM Name (text box editor type) (type: string): the name of virtual machine.

As mentioned above, the values for all the required parameters can be provided by IN arguments or variables. Below is an example of predefined arguments, ready to be used by the VM Get Status activity:

The Read Only Output variable are the possible output values that the activity will provide:

Output Status (type: collection<collection<string>>): outputs the current status of the virtual machine.

VM Get Virtual Hard Disk

This activity retrieves information about a virtual hard disk.

Activity Parameters

The VM Get Virtual Hard Disk activity parameters can be provided by manual inserted values or via IN arguments or variables:

Parameters:

Path (text box editor type) (type: string): the fully qualified path that specifies the location of the disk image file.

As mentioned above, the values for all the required parameters can be provided by IN arguments or variables. Below is an example of predefined arguments, ready to be used by the VM Get Virtual Hard Disk activity:

The Read Only Output variable are the possible output values that the activity will provide:

Output Details (type: collection<string>): outputs all the information about the virtual hard disk.

Browser not supported